View Full Version : Feronite or Fish Oil?
mudnut
30th August 2015, 05:45 PM
G'day all. I have had
a chance to shove the
inspection camera into
the Old Trol's chassis.
There are a few spots
of surface rust on the
bottom section.
Is it a good thing to
spray some Feronite
in and letting it do
its thing, or is
just spraying fish oil
in going to be okay?
Is there a better product that
kills rust and sets hard?
mudnut
30th August 2015, 06:34 PM
I had to bump
this thread because
of the intros.
Clunk
30th August 2015, 06:40 PM
nah you didn't, it was only 45 minutes ago
mudnut
30th August 2015, 07:03 PM
How far down the post
count was it? Who
won the welcome
comp?
Clunk
30th August 2015, 09:01 PM
How far down the post
count was it? Who
won the welcome
comp?
Growler did but I could have gone through Jan, Feb and March........... wouldn't that have been fun ;)
mudnut
30th August 2015, 09:03 PM
Oh soooo much fun!!
jack
30th August 2015, 09:10 PM
growler did but i could have gone through jan, feb and march........... Wouldn't that have been fun ;)
no ........
Clunk
30th August 2015, 10:38 PM
No takers yet I see
mudnut
30th August 2015, 11:26 PM
Nah. obviously the
question is just
too mind boggling.:)
Onkey
31st August 2015, 03:46 AM
Nah. obviously the
question is just
too mind boggling.:)
I live in England so i now a (lot) about rust i would say you relay don't have to do anything to the chassis because the body and body mounts rust first.
But i hate rust so the absolute best you can do without removing and dipping the chassis is to spray it with ACF-50 oil and then with a wax.
ACF-50 is the best creeping oil there is at stopping rust and preventing rust i have personally tested it. and ACF-50 is synthetic so no animals where killed. :)
Onkey
31st August 2015, 03:49 AM
and remember rust converters do not work very well. if you want more help on rust let me now
threedogs
31st August 2015, 08:00 AM
I live in England so i now a (lot) about rust i would say you relay don't have to do anything to the chassis because the body and body mounts rust first.
But i hate rust so the absolute best you can do without removing and dipping the chassis is to spray it with ACF-50 oil and then with a wax.
ACF-50 is the best creeping oil there is at stopping rust and preventing rust i have personally tested it. and ACF-50 is synthetic so no animals where killed. :)
Who makes ACF-50 and is it readily available is Aust ?
mudnut
31st August 2015, 11:48 AM
Here is there website:
http://www.blockchemical.com/electrical
It looks the goods, but is
only effective for 12 months.
and there seems to be
QLD stores only.
I wonder of after applying
this stuff, you could
spray a coat of fish
oil to give a more
permanent surface?
threedogs
31st August 2015, 02:56 PM
Bigfella sells a product that stops rust ,or at least prevents it.
Been so long think it was called shark skin , or similar,.
Onkey
1st September 2015, 10:08 PM
Cavity wax (slows rust and prevents rust very well) is the best for long lasting protection. i use ACF-50 on rust (stops rust) first and then wax everywhere else.
ACF-50 is made in Canada.
mudnut
30th January 2016, 05:32 PM
Acf 50 data sheet. http://www.acf-50.co.uk/acrobat/ACF-50AEROSOL2011MSDS.pdf
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.