brakes after 2" lift

[dads tractor]

Anyone notice that the braking effort isn't as sharp after doing a 2" lift (AmadaXtreme Explorer 11 2" Lift Kit Nissan Patrol GQ/GU (Stage 2) and going from 265 to 285 tyres .

[BigRAWesty]

Well bigger tyres will certainly affect the brakes. Your trying to stop a greater rolling resistance.
But you may also need to get a bracket for the proportional valve at v the rear axle.. cheap and chips and will get the valve back into normal range.

Sent from my SM-G800Y using Tapatalk

[dads tractor]

Thanks Westy that was going to be my next mod stick with superior or are they all a much of a muchness ?

[dads tractor]

So anyone extended the bias adjuster and what brand did u use ?

[BigRAWesty]

It's just a bit of steel flat bar with holes to suit.
If you have a bit lying around just make one.
I have a few in my shed if you like I'll send you one.
I need to fit mine to lol. Only been 7 years.....

Sent from my SM-G800Y using Tapatalk

[dads tractor]

7 years Westy whats the hold up flat blacks or frothies ? got the science behind then ?????

[Clunk]

too many other more interesting projects hey Westy

[BigRAWesty]

Bloody oath. Kids, house, mods and now camper trailer..
It's one of those jobs you see on the bench and remember but though has vacated by the time you leave the shed

Sent from my SM-G800Y using Tapatalk

[dads tractor]

Ah kids we have just achieved the status of empty nesters yah .Got a bit of flat bar and made the 2" spacer and now have brakes that work so thanks for the help Westy.

[BigRAWesty]

I found that bracket again lol..
61003

[dads tractor]

I just used the original bracket traced the holes with both brackets flush at the bottom then measured the base of oem up 51mm and repeated then drilled .If you use 40mm w plate the oem bracket sits flush so the holes are centered ,fit and have a beer done .