trekster
15th August 2015, 08:31 AM
Hey guys,
Last weekend fitted my pyro gauge in through the passenger side firewall, Picked up ignition power off the radio for my gauge and hooked it all up. Next day the 3 lights were stuck on, quite weird I thought, I checked all the hoses/cable etc near the abs, diff lock etc and found it all to be good. The other night was retracing my work to try and find my problem, one of the wires on the difflock control had a wire spliced into it which i then removed and hooked the wire back up, lights went out.
Yesterday drove it to work got 3/4 of the down there and they came on again
Pulled the small abs fuse out from in cabin and the traction control off light goes out but the other 2 stay on.
Anyone had this issue or can give me any other ideas where to look? Fuses are fine and i did an ecu fault scan with torque and couldn't come up with anything either, very frustrating!
Cheers.
Last weekend fitted my pyro gauge in through the passenger side firewall, Picked up ignition power off the radio for my gauge and hooked it all up. Next day the 3 lights were stuck on, quite weird I thought, I checked all the hoses/cable etc near the abs, diff lock etc and found it all to be good. The other night was retracing my work to try and find my problem, one of the wires on the difflock control had a wire spliced into it which i then removed and hooked the wire back up, lights went out.
Yesterday drove it to work got 3/4 of the down there and they came on again
Pulled the small abs fuse out from in cabin and the traction control off light goes out but the other 2 stay on.
Anyone had this issue or can give me any other ideas where to look? Fuses are fine and i did an ecu fault scan with torque and couldn't come up with anything either, very frustrating!
Cheers.