PDA

View Full Version : Led blinker & park



moonie
28th July 2015, 11:09 AM
ID like to replace the blinker & park light in the steel nissan bullbar with LEDs dose anyone know if thay make them i been to auto shops in orange but no go here.any hope or help...

clubbyr8
28th July 2015, 11:48 AM
ID like to replace the blinker & park light in the steel nissan bullbar with LEDs dose anyone know if thay make them i been to auto shops in orange but no go here.any hope or help...

This one fits my alloy bullbar......

http://www.ebay.com.au/itm/1-PAIR-12V-LED-FRONT-INDICATOR-MARKER-LAMP-TRUCK-BULL-BAR-175AW-CLEAR-WHEN-OFF-/131559775705?pt=LH_DefaultDomain_15&hash=item1ea192ddd9

threedogs
28th July 2015, 03:53 PM
That link will fit there is a smaller 145mm indicator only, Im toying with fitting.
If you fit them dont forget some 50 ohm resistor to stop the fast flash,
one for each side
http://www.ebay.com.au/itm/161059480722?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
http://www.ebay.com.au/itm/4Pcs-Load-Resistor-50W-6ohm-Fix-LED-Bulb-Hyper-Flash-Turn-Signal-Blinker-Sales-/301478390175?pt=LH_DefaultDomain_15&hash=item463183299f
DO NOT USE SCOTCH LOKS IN THE LINK< THEY WILL FAIL

clubbyr8
28th July 2015, 05:59 PM
That link will fit there is a smaller 145mm indicator only, Im toying with fitting.
If you fit them dont forget some 50 ohm resistor to stop the fast flash,
one for each side
http://www.ebay.com.au/itm/161059480722?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
http://www.ebay.com.au/itm/4Pcs-Load-Resistor-50W-6ohm-Fix-LED-Bulb-Hyper-Flash-Turn-Signal-Blinker-Sales-/301478390175?pt=LH_DefaultDomain_15&hash=item463183299f
DO NOT USE SCOTCH LOKS IN THE LINK< THEY WILL FAIL

I used a led flasher, just replaced the standard flasher. Less messy than putting resistors in... :)