will 33's fit on standard mq

[blocko05]

Hi bokes,

just wanted to know if 33's would fit on a standard MQ shorty with no lift. on 8 inch rims. Has anyone tried this at all and if so was there any rubbing and could you get full turn of the steering wheel without the tires hitting any part of the vehicle.

cheers
blocko

[Madman]

Did you come up with any sort of conclusion on this? I will be buying tyres over the next couple of weeks and would be interested to see what others are running..... 81 MQ lwb

[blocko05]

Hi Madman, I also posted this on face book and there was a good response to it. I had pics sent to me stating that they do fit. They will rub on full lock only and the back tires tuck up under the guards with no problems. hope that helps mate.

[Clunk]

Would be useful for the forum to see such pics mate

[katwoman]

Hi Madman, I also posted this on face book and there was a good response to it. I had pics sent to me stating that they do fit. They will rub on full lock only and the back tires tuck up under the guards with no problems. hope that helps mate.

And suck all the power out of your engine.

[blocko05]

59862598635986259863I have copied the conversations from my facebook page for all to see the comments. I have attached the 2 photos that were sent to me as well.




Flip Smith-flop asked a question.
July 10 at 7:43pm

Will 33's fit under a standard lift MQ shorty or will it rub when turning the front wheels

Like Comment Share

Benn Thompson 36's no lift only scrubs when full lock
Benn Thompson's photo.
July 10 at 7:47pm · Unlike · 1
Flip Smith-flop are they 12.5 inch
July 10 at 7:48pm · Like
Flip Smith-flop loos tough as
July 10 at 7:49pm · Like
Benn Thompson yeah they are, its only a paddock bomb haha
July 10 at 7:49pm · Like
Flip Smith-flop do they hit the guards at all during the suspension travel
July 10 at 7:50pm · Like
Benn Thompson nah, the rims arent a wide offset so they tuck up in the guards
July 10 at 7:51pm · Like
Flip Smith-flop thanks for the info mate
July 10 at 7:51pm · Like
Glen Scholz 33x12.5x15 on almost full lock would grab the blinker covers inside the guards on my stock height swb.
July 10 at 8:03pm · Unlike · 1
Flip Smith-flop so it wont touch the chase or guards at all during off roading just the indicator
July 10 at 8:05pm · Like
Glen Scholz On mine it was pretty much only the little cover plate. From what I remember it never touched the guards
July 10 at 8:09pm · Like
Flip Smith-flop thats great mate. thanks for the info
July 10 at 8:10pm · Like
Glen Scholz
Glen Scholz's photo.
July 10 at 8:11pm · Unlike · 1
Flip Smith-flop what about the rear wheels, do they hit the guards
July 10 at 8:13pm · Like
Glen Scholz They tucked under and didn't touch.
July 10 at 8:13pm · Like
Flip Smith-flop thats great, thanks for the info
July 10 at 8:14pm · Like