Merged - Deleted "Wanted"

[megatexture]

will be a buisy week realy for some buisy doing nothing at neurum creek relaxing! but some of us have to work:frown:

[snewin]

Long Range fuel tank link (https://www.google.com.au/search?rlz=1C2SKPC_enAU375&hl=en&safe=off&site=&source=hp&q=nissan+patrol+long+range+fuel+tank&oq=nissan+patrol+long+range+fuel+tank&gs_l=hp.3..0j0i8i30l2.352.4704.0.5436.34.19.0.0.0. 0.996.3790.4j11j2j0j1j0j1.19.0.les%3B..0.0...1c.1. g9r_M-8I77s)

Water tank link (https://www.google.com.au/search?hl=en&safe=off&rlz=1C2SKPC_enAU375&q=nissan+patrol+water+tank&oq=nissan+patrol+water+tank&gs_l=serp.3..0l2j0i8i30l3.24994.25951.0.26312.10.8 .0.0.0.0.232.899.3j3j1.7.0.les%3B..0.0...1c.1.taeb 2lit1pc)

Winch Bar link (https://www.google.com.au/search?hl=en&safe=off&rlz=1C2SKPC_enAU375&q=nissan+patrol+winch+bar&oq=nissan+patrol+winch+bar&gs_l=serp.3..0j0i8i30l3.45053.45910.0.47326.9.7.0. 0.0.0.424.1499.3j0j2j1j1.7.0.les%3B..0.0...1c.1.fO VLWY4NQRQ)

[megatexture]

is that a polite way to say do some research ?:p

[audiman]

seem to be struggling here in uk for bits for my patrol

could do with a speedo cable and speedo gear for a 260 series swb 2.8 carb l28 engine on a 92 plate with a 5speed box its a spanish bulilt and as far as i know totally standard engine and box

can paypal if anyone has these couple of itms would they be happy to ship to uk

cheers

Lee

[Clunk]

There's a couple of vendors on here that may be able to help....... Try nissbits or patrol-a-part
I think their websites and contact details are on their threads
Don't stroke it, TAP it!!!!.....

[the ferret]

Here ya go mate.
www.nizzbits.com.au
email nizzbits@hotmail.com
Cheers, the ferret.

[markmk]

could be lol

[markmk]

I was actually trying to find second hand items as trying to save a few dollars

[mick63]

Hi i am chasing some sidesteps prefer alloy for gu cab chassis also factory drink holders that go in the door cards.

[threedogs]

Your local shop may have OE steps laying around, they only throw them out for scrap. Crawl around The shops in your area

[BigRAWesty]

Were r you to mick?
I've recently taken off some custom alloy side steps, there a bit rough but all mounts are there and could be cut and shut to suit ute.


Sent from a device which doesn't always agree with my thumbs...

[ashleylipus]

I have a rear seat but I'm in Melbourne.. 20683
Is this the colour and material your after. It's in immaculate condition

[MudRunnerTD]

Just took a Dicky seat to the Tip!

That interior panel you are after is the "Jack Compartment" door

[audiman]

niss bits cant ship outside Australia and the other company has not returned my email request

dont suppose anyone would be prepared to but from 1 of these 2 companies and then ship to me I can paypal straight away if there is a nice person who could help

cheers

lee

[team grandpa]

hello all

has anybody got any second hand / or resonablely priced new recovery points for a 91 ford mav or gq patrol in the ipswich/ brisbane south area
if so could u please contact me
thru a p/m

cheers neil
team grandpa

[MEGOMONSTER]

Check Outback Ideas thread in the search bar on the forum


Sent from the secret chambers of our secret society, on a secret iPhone, with a secret pin code and eye retina scanning from a secret peep hole, just don't tell anyone OK, cos it's secret........

[the ferret]

niss bits cant ship outside Australia and the other company has not returned my email request

dont suppose anyone would be prepared to but from 1 of these 2 companies and then ship to me I can paypal straight away if there is a nice person who could help

cheers

lee

Lee, if you order them and pay Nizzbits with Paypal, then get him to send them to "Ferret Tools", I will forward them for you and you just fix me up for the postage.
Garry has my address.
Cheers, Rod.

[Warnie]

Hey Tarpy31, have you started wrecking your rig yet? If so can I come and have a look for a few parts. I am only just around the corner from you? I private messaged you my number, send me a text or give me a call to discuss.

Adam

[Glen 93 patrol]

Hi everyone.

Im on the hunt for a set of roof rack cross bars and mounting points for a gq lwb. planning on mounting a roof tent on top but i need some bars first. Does anyone have a set for sale or some lying around they have long forgot about, pm me and let me know.

Cheers Glen.

[threedogs]

Hi Neil, PM sent

[Steve200b]

Looking for a sump and pickup from a Rb30 or Rd28 and engine mount brackets that bolt to the block.

Thanks
Steve

[PattyWgnOwen]

The difference is negligible for an LSD. Only prob if locked or an dead smooth Surface??? LOL.

The difference is less than you would have on a rotation. If you are worried measure rolling circumference or put on front if you need it.

[King_ady1]

Hey guys. Just chasing a 4wd stick assembly the whole piece including elbow links.
It's for a 1993 gq patrol. Don't know if any difference between years and makes.
Second hand or new if available. I don't mind as long as its not rusting.

Thanks king_ady1

Sent from my HTC One X using Tapatalk 2

[King_ady1]

Also chasing a duel battery tray for a gq. In brisbane would be good aswell.

Sent from my HTC One X using Tapatalk 2

[bazz61]

hi, after a drivers door mirror, prefably the type that mounts on via a piece of rightangle metal that screws to plastic on door, they stick out a bit more than on a short adjustable arm .
thanx Barry QLD

[radius fab]

hey mate i have a gear changer. send me a msg 0431140098

[my third 256]

ebay has some

[Bigrig]

You could try Patrolapart and Nizzbits in Victoria also mate.

[nissannewby]

If its just the ones that bolt to the doors with like a steel frame I have a couple but you can buy these new for about $30 each in a britax brand From most good parts suppliers and the wreckers that sell new parts too

[bazz61]

thanx guys , after reading the print on surviving one, its genuine nissan , ebay 80 odd bucks is a bit steep when compared to my caravan towing mirrors, ... cheers

[Trollol]

G'day fellas, was just wondering if you know anyone selling or has a spare console floating around at home? Ive got the povo pack DX and i would like a little more storage space and an arm rest lol

Can get a company to send one out to me but they want atleast 500+ and i was hoping i can get a second hand one

PM me or post here with a picture if possible :) Need to match it to the colour of my interior and your asking price :)

Cheers Ethan

[threedogs]

easy enough to make to your specs if you have anyone handy with wood or even sheetmetal
could custom make your own for under $50 I'd say. Still look factory, not train science

[nissannewby]

Unfortunately mate even second hand or through the wreckers they will fetch about 500 for what you need to install. You will have to be patient to they are generally picked up quick.

[threedogs]

Definitely be making my own at those prices sheeeesh

[P4trol]

http://pages.ebay.com/link/?nav=item.view&id=12099719395


Tipsy-tap

[NissanGQ4.2]

http://pages.ebay.com/link/?nav=item.view&id=12099719395


Tipsy-tap

Link doesn't work mate

[P4trol]

Sorry, I think it is something to do with the link designed for Android ebay.

A basic centre console, less than a day to go, $40 at time of posting.



Tipsy-tap

[my third 256]

here is the link be quick though
http://www.ebay.com.au/itm/Nissan-Patrol-gu-centre-console-glove-box-arm-rest-good-condition-/120997193956?pt=AU_Car_Parts_Accessories&hash=item1c2bfea8e4

[nissannewby]

Just be careful there is other bracket required to mount them, the gear stick surround is different. I have just done this myself and there is about 5 different bits to complete it.

[cjs777]

Hi im looking to find a turbo kit to put on my 1998 GQ 4.2L Deisel if anyone has some idea and is flexible with payment please contact me on 0411396768

[nissannewby]

Where are you located?

[MQ MAD]

Hey Lads,
Im chasin a few bits for the shorty project

Front door trims, prefer blue, but not fussed really
Right front guard, straight,minimal rust
Tailgate,can be from either wagon or shorty, nice n straight and not rusted out

Brissie area ONLY

Cheap,cheap
Think BUDGET build

Will trade/part trade for other MQ/MK bits

[tonkatuffrosie]

Hi guys,

Im after a new set of 5 steel rims and tyres for the trusty patrol.

Looking for black sunraysia rims either 16"x8" or 17"x8" (give or take), and
Looking for muddy or aggressive A/T tyres, 33" preferred (give or take),

Plenty of tread would be great but PM me and let me know what you have and for how much and can go from there, the cheaper the better

Also i am in sydney currently but can work out plans from Sydney, Adelaide or Brisbane areas for pick up if all works out

Cheers, Robert

[radius fab]

wanted gu to template bar work...



hey guys after a gu series 1,2 or 3 to template bar work for my offroad fab shop. in return i can do you a great rate on barwork. prefer something without body lift and stock.

cheers

[starkey]

I am after some standard bucket seats from a MK or MQ patrol complete with rails.

location: Newcastle or Sydney

contact: PM

[patrol_maverick]

Wanted:

Cheap pair of GQ/ GU standard radius arms (front control arms).

Will pickup within Taree- Forster areas (NSW).



Contact: Private message, or patrol_maverick@optusnet.com.au

[Ben-e-boy]

I got some but Im at the northern end of the sunny coast. bit far to drive

[Spybot]

Hi gang looking for your help

I am in the market for a new model with some options would be nice:

Wish list is:
Leather and dual climate like the ST-L models
Pref a 4.8 l want the power
White
Diff locks
Winch
Front / rear ARB bar
Good nick

Have the money ready to go looking to spend no more then 35k

So if you got a mate with one for sale or you want to sell your give me a call
0439 735 177 - Damian

Sent from my iPad using Tapatalk HD

[Casper1990]

Hi All, we are after an original (or even aftermarket) normal sized steering wheel for our GQ. Has a sports one on at the moment and want to change to normal, Thanks in advance

[growler2058]

Think they may be getting hard to come by mate
Mines a 90 model like yours and was 100% Fubar
Good luck though mate, try a nissan wrecker maybe


Sent via my tapping thumbs

[patrol_maverick]

Thanks but I've been offered a few closer to home.

[Woodsy]

Wanted, RD28T Inlet Manifold with the inlet elbow and the elbow which is bolted to it on the left side. Am happy to pay freight to Perth. Cheers Woodsy.

[pjwooly]

Hey all i need a steering wheel for a 90 GQ.If any one has one in the SEQ area and wants to sell or offload i would like to hear from you.Resonable wear is fine .

Cheers

Pjw

[rusty_nail]

Hey mate I don't have one for u but I just replaced mine as it was cactus. I bought a boss kit and a wheel from super crap and it does Te job. I know a lot of other forum members have done a similar thing.


Tappin

[pjwooly]

thanks rusty...i have one in the car ATM too but i ripped the horn out when it started going off when i was driving around the car park and wouldnt stop.
So jumped out and started pulling wires until it stopped.Then the horn bit in the middle went missing or broke so.....i thort i would replace it with a OE steering wheel.
Have heard they are hard to get so will probly just get another after market one.

Cheers mate.

[DC-Auto]

i have an aftermarket wheel "nissan" horn button if you want it (i have no need for it). im also on the coast.

[Alitis007]

Hi all, i'm after the facia / cover that fits around the radio and climate control on a 99 Ti, its that woodgrain look.
Cheers.

[Gu 45]

Hi peoples i,m after a bash plate for my long range rear tank let me know if you have one cheers

[Clunk]

Not sure where abouts you are..... apologies if you've mentioned it somewhere but I couldn't see for looking.

Anyway, found this if you're over this neck of the woods......http://www.gumtree.com.au/s-ad/huntingdale/other-parts-accessories/gas-tank-bash-plate-for-4x4-or-car/1008812637

[BOWZER]

Hi al im after spotlights to mount to my bar, the current ones are sealed and dont work.


cheers chris

[threedogs]

YO bowzer got brand new 55watt hid 10,000k jobs here same as pic.
very bright will not fit with OE bullbar

[chester]

What kind you after mate ive got some that come out on the GU's IPF i think they are.

[iansmqshotyy]

got a pair of guards, im goin gq , blue door trims average condition pass guard is perfect bar snorkel holes driver has a little cancer but straight.... im in need of a gq grill indicators rx side lights or a good set of shorty seats... any of the above would do (:

[Woof]

Hey mate, it is always nice to post up an introduction before asking for assistance, something we are keen on here

[patroltb42]

bumping this

[BOWZER]

hey all thanks for the replies, one of my mates gave me his rallye 2000s

[belzi82]

Bowzer - baysie north my old stumping ground

[Gu 45]

Hi Clunk thanks mate but i want it for my long range fuel tank

[MudRunnerTD]

Hi Bud,

I am not aware of anything that is commercially available as a bash plate for a Long Range rear tank.??

I have a 145lt tank in my GQ and my GUIV and neither have a bash plate or a provision for one??

I can tell you that my GQ 145lt tank is likely to only be about a 130lt tank and has taken some VERY VERY Big hits! Never leaked and very impressed.

You might need to get something custom bent if your really concerned.

[Tuff_42]

Hi everyone new to the forum. I'm chasing some parts for my gq I'm looking at putting dual aircon into my wagon. If someone in the Brisbane area is wrecking one that would be great or know of any.

Cheers josh

[BOWZER]

belzi82 where bouts are you now?

[FredFrothen]

Hey guys i'm after a tray for my 08 Ute, All GU trays will fit although preferably off a leaf chassis otherwise i'll have to do some modding.

pm or post here.

[FredFrothen]

Hey i'm after a set of GU Electric Mirrors with the master switch, If you're outside of qld still contact me as i will pay for postage.

post or pm me.

[FredFrothen]

Looking for a GU Front Passenger Seat & the Centre Console with the trim that goes around the gearstick and transfer stick.

post here or pm me

[my third 256]

plenty on ebay mate some good prices some shockers

[pjwooly]

Hey thanks DC but i got it sorted.I have put a horn on the centre dash.
The little red button.Apparently its legal.!!

[steve4377]

Fred, I bought a cheap ebay manual one, as the genuine ones are, as 256 pointed out, shockers in price (around 4 - 500 bucks). It's okay on the driver side as you can reach out and move the thing manually, but would be a pain on the offside. If ya do buy a manual one, take off the plastic frame and remove the mirror and silastic around the whole thing or the mirror will fall out and cost ya another $30 like me, DOH!!!

[ROGQ]

I'm chasing a GQ or GU Patrol with either a blown motor or something else wrong mechanically that will lower the price. I just need a straight, rust free body with the interior in decent condition for a dual cab chop.

Email or PM if you can help out.

Cheers
Rohan

rdtn@live.com

[Cbates]

Hi guys, Really keen to get some black wheels on the patrol! if you know anyone or the cheapest joint to get some 16x8's for my gu that would be awesome! Also after i buy them will be selling guIII wheels!
Thanks!

[my third 256]

why not get your rims powder coated or are they alloy

[Cbates]

I would but yea they're alloys. Good idea though!

[threedogs]

PM me they look awesome powder coated,Few things you need to know
Charcoal metallic grey, Another great colour is precious metallic siver,if your 4x4 is silver/grey

[nissannewby]

You can still powder coat and paint alloys. You may find powdercoating will cost just as much as buying a new black steelie.

[Cbates]

Yea was weighing that up, wouldn't mind some steelies, anyone know a good place with a good price?

[oxmann]

Just wondering is there anyone over the ditch that ships parts/goodies to NZ if we cant source them over here....not looking for anything particular at the moment but getting ready for a few mods in the near future.....


cheers

[NissanGQ4.2]

If you are buying brand new then all descent suppliers will post to NZ, I think them charging for post would be same ( if not cheaper ) as what any other person here could get postage for you.

I wouldn't recommend buying second hand from anywhere without seeing it for yourself. And most largish second hand ebay / gumtree ( etc ) stuff would be pick up only. And trying to arrange a transport company to pick up and deliver might be more drama's then its worth.

Cheers

Toddie

[oxmann]

Thanks Toddie.....yeah i wouldn't look at buying 2nd hand from your way......but there's some awesome looking and well set up wagons on this site and that only comes about from all the well stocked outlets and gear that is available to you all .....so Oz not that far away and they will built a bridge one day.......:hpfredgeorge1:

[Bloodyaussie]

Yeah and then I will be over there hunting a lot then!!!!!

[oxmann]

:wink:Plenty of that here if you got the contacts and know where to go .......funny you mentioned hunting, just had a feed of venison steaks on the bar-b nothing I shot to be honest, but a long over due promise from my son.....damn nice in fact bloody damn nice....:wink:

[Rick111]

I am after a set of rear airbags to suit GU patrol with a 2" lift,

[gu8 patrol]

hey guys im looking for 1 only 17x8 alloy rim for a series 8 gu patrol,some noob on ebay wants 980.00 for 1 rim.

[Woof]

Don't know if they have been sold mate http://www.gumtree.com.au/s-ad/ellenbrook/wheels-tyres-rims/nissan-patrol-guiv-17-rims-and-tyres/1008768955

[macca86]

Hi guys I've been having trouble with my gearbox and want it replaced or re built does anyone have any ideas where to pick one up or have mates that can sort it out on the cheap

[macca86]

Bump bump bump

[the godfather]

What troubles you having? To rebuild it yourself isn't all that expensive.

[macca86]

I pop out of first gear whist driving. I crunch into 2nd gear on up shift and down shift and crunches on the upshift to 5th. This all happened after I flooded my car and got mud and water in the box. I've dumped the oil twice. I'm going to change the locator spring and id that's not it its syncro damage. Gearbox mounts look fine no play in them.

[marzi]

Hey guys,

I am after a cheap tow bar for my 1992 Nissan Patrol GQ in Victoria. Im just looking to do some light towing probably a couple times a year.

Cheers!!

[Bloodyaussie]

You might want to introduce yourself mate????

Yeah I have one on my donor parts car..... what do you want to pay, and dont be cheeky

[marzi]

Introduction done! Thanks mate,

I would much rather you give a price :) I'm new to all this

[healy]

You might want to introduce yourself mate????

Yeah I have one on my donor parts car..... what do you want to pay, and dont be cheeky

I'll give you $5 but I would like the tow set up and $10 in return

[Bloodyaussie]

I'll give you $5 but I would like the tow set up and $10 in return

You are strange Anthony????? but you knew that!!!!

I dont know what a towbar is worth??? I will have a look.

[Finly Owner]

Get it shipped to Nelson Port would be best foe you I reckon



Tim

[fastone13]

do you guys know where i can get a left hand side air vent my ones broken thxs

[macca86]

Bump anyone got a box for sale or want to help me rebuild mine

[nissannewby]

Nizzbits or the wreckers mate. Also a little more info will help as well as some members may have this sort of stuff laying around.

[AB]

Patrolapart in Lilydale Melbourne too...

[Bigrig]

Mine too - and ALL the wreckers I went to had plenty of spares ... for every other vent except that one!! Hunt around champion and you should find one ...

[nissannewby]

Was that the outcome from the mechanics?

[macca86]

Dropped it off today no word yet mate was going to text you once I found out

[NissanGQ4.2]

Passenger side is known to be the one that always breaks, I'm also after one, but haven't bothered 2 search for one yet

I have moved your thread over to the wanted section and changed the title

Cheers

Todd

[sime]

Hi Guys

Im looking for 5x GU Patrol 17" Alloy Wheels

Melbourne If possible

Cheers
Simon

[WYLD333]

Hey mate, i have a set of 5 will b 4 sale next week, just put new tread on them 2

[WYLD333]

Wheels now listed on ebay item number 221162902851

[trekster]

No longer needed thanks.

[Ferret]

just after a sd33t motor located in vic would be good or even a setup

[hamo65]

There is one on egay

Sent from my HTC Desire HD A9191 using Tapatalk 2