GU TD42T bolt on engine parts.... [Archive]

mudski

19th June 2015, 04:35 PM

Ok. Peoples. I'm about to embark on a ZD to TD GU conversion and I need a few bits. I'm not really sure on what I'm missing at the moment but heres a list of what I know I need....

Power steering pump and brackets I have...
Power steering piping I have...
A/c Pump and brackets ( I think) I have...
A/C piping Maybe be able to use my hoses???????
Fuel filter head I have...
Bellhousing to suit.....
Engine mount brackets, from motor too engine mount.
Chassis to engine mount brackets I have...
RHS rear engine to trans bracket

Thats all I can think of right now. Its a bit overwhelming on what parts I will need that I don't even know of yet.

Alternator, starter, radiator, shroud, clutch fan and engine fan, turbo and maybe intercooler (depending on whats for sale second hand) I will get new.

Thanks.

Bloodyaussie

19th June 2015, 04:43 PM

Good luck trying to find a power steering pump.... i had to give gary a gobber to get his off him.

jff45

19th June 2015, 05:34 PM

I have a power steering pump off the TD42T motor I just bought.
I also have a new high pressure hose I just ordered from Patrolapart before I decided to use the TB45 pump.
I also have a TB45 A/C compressor - it bolts to the bracket on my TD42T so I assume it's the same. It has the O'ring type connections for the hoses.
I'll try to take some pics this weekend.

mudski

19th June 2015, 05:54 PM

jff45

19th June 2015, 06:14 PM

Thanks. Can anyone confirm the a/c TB45 a/c pump will be the same? Assuming if it bolts up and the wiring plugs are the same, it will be yes...
While your taking pics. Can you take some pics of all the "bolt on" brackets? Please. Just so I get some reference of what I have and dont have. Thanks.

Do you mean all the cast brackets?
I will probably have the cast bracket for the alternator and also the cast bracket for the power steering pump.
If it is a TD42T factory turbo block, I also have the original oil feed & oil return hoses for the vacuum pump on the alternator.

Do you have a pic of the LH side of your block?

Bloodyaussie

19th June 2015, 06:16 PM

F%$k you get lucky Mark..... think I am going to run you over... hmmm maybe when you have paid for and completed the build !!!!

jff45

19th June 2015, 06:18 PM

Pic of pump..

...

jff45

19th June 2015, 06:30 PM

Pic of A/C compressor (TB45E) mounted on TD42T block

...

19th June 2015, 06:55 PM

Is your block a td42T mark?

mudski

19th June 2015, 07:56 PM

Is your block a td42T mark?

Yes mate it is....

mudski

19th June 2015, 07:59 PM

Do you mean all the cast brackets?
I will probably have the cast bracket for the alternator and also the cast bracket for the power steering pump.
If it is a TD42T factory turbo block, I also have the original oil feed & oil return hoses for the vacuum pump on the alternator.

Do you have a pic of the LH side of your block?

Hmm. I took a shite load of pics when the block was here. Over the weekend I will look at the brackets I have and try to work out what they are. The motor is already at the work shop.....

Its a factory TD42T block btw.

mudski

19th June 2015, 08:01 PM

F%$k you get lucky Mark..... think I am going to run you over... hmmm maybe when you have paid for and completed the build !!!!

Err why?.......

Bloodyaussie

19th June 2015, 09:00 PM

Err why?.......

Because it would be oh so much fun........

jff45

20th June 2015, 12:46 PM

Alternator bracket on the left. Power steering pump bracket on the right

...

mudski

20th June 2015, 04:38 PM

Thanks mate. Ill check out what i have tomorrow and try to get some info of tha ac pump.

jff45

20th June 2015, 05:04 PM

What turbo manifold are you planning to use?
I have the original 2 piece cast factory manifold that could be for sale.

mudski

21st June 2015, 12:20 AM

What turbo manifold are you planning to use?
I have the original 2 piece cast factory manifold that could be for sale.
Low mount mate and definitely interested in what you have. What else ya got? Lol.

Sent from my SM-P600 using Tapatalk

jff45

21st June 2015, 07:47 AM

I have the crossover piping but that won't interest you with what you're planning..

As you mentioned, have a good look at what you need so we get a clearer idea of where we're going with all this.

mudski

21st June 2015, 02:26 PM

Alternator bracket on the left. Power steering pump bracket on the right

...

Ok the bracket on the left I have. I don't have the upper adjusting bracket.... The one on the right, it looks familiar, I dont have it in my bunch of photo's. So I will assume no, also the adjusting bracket for the pwr strg pump too... Everything is at the workshop now so I can't check.
Do you know what the part circled is?
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=59061&stc=1

And is this bracket circle below the A/c pump bracket? Assuming it is....
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=59060&stc=1

Not 100% on the a/c pump pipe fitment though. yet

mudski

21st June 2015, 02:28 PM

Just add another on the list. Brackets from motor too engine mounts.

jff45

21st June 2015, 04:20 PM

jff45

21st June 2015, 04:23 PM

This is the manifold.

...

mudski

21st June 2015, 05:50 PM

The first one circled looks like the part that bolts to the bottom rear of the engine, not sure which side, and supports the lower half of the trans. There's one on each side but they're not similar.
Could take pics tomorrow of them both.

The second circle could be for A/C but it's not the same as mine. If it is for A/C, the TB compressor won't fit to it.

Yeah I reckon your right about the first one. Just going through the Nissanfast catalog and found them. I suppose mate, make up a list of what you have and what $$$ your after and then, pm it to me. I'll see the mechanic next week. This week I have too much on.

jff45

22nd June 2015, 10:00 AM

You're clearly in no hurry so let's see what you really need down the track.
I'm in 2 minds about the manifold, I'm thinking it might be better to keep it and bundle it with turbo, crossover stuff, dump. etc if I change the turbo. That makes an almost complete bolt-on turbo kit for someone. With no manifold, nobody would want the other stuff..

mudski

22nd June 2015, 01:38 PM

Yeah thats ok mate

mudski

22nd June 2015, 11:09 PM

The first one circled looks like the part that bolts to the bottom rear of the engine, not sure which side, and supports the lower half of the trans. There's one on each side but they're not similar.
Could take pics tomorrow of them both.

The second circle could be for A/C but it's not the same as mine. If it is for A/C, the TB compressor won't fit to it.

I would take the a/c pump bracket to suit mate. Just did a quick look around and the pump is the same, for TB/TD and RD28...
Get some prices together mate and send me a pm if you like.

jff45

23rd June 2015, 06:16 AM

I don't have the A/C compressor bracket, only the compressor.

jff45

23rd June 2015, 08:18 AM

Just add another on the list. Brackets from motor too engine mounts.

Just an FYI, these are the same as TB45 so shouldn't be too hard to find. I don't have any spare, I'm using the brackets from my TB when I pull it.

jff45

23rd June 2015, 08:40 AM

I would take the a/c pump bracket to suit mate. Just did a quick look around and the pump is the same, for TB/TD and RD28...
Get some prices together mate and send me a pm if you like.

I've just taken a closer look at your A/C bracket (the one you had circled in an earlier pic) and it is the same as the bracket on my TD42T so the TB45E A/C compressor will fit on it.

jff45

23rd June 2015, 09:47 AM

Another FYI, here's a pic of the 2 cast brackets you need that bolt to the rear of the engine and to the trans.
The one on the right is for the RH side.

...

mudski

23rd June 2015, 10:28 AM

Bloody rippa. So I need RHS....

Thank you.

jff45

24th June 2015, 08:37 PM

Bloody rippa. So I need LHS....

Thank you.

Here's a pic of the LH side bolted to the engine.

...

mudski

24th June 2015, 08:44 PM

Here's a pic of the LH side bolted to the engine.

...
Mate your a legend. Now. Anyone got one of these?

Sent from my SM-P600 using Tapatalk

24th June 2015, 09:05 PM

You've struck gold Mudski!!

mudski

24th June 2015, 09:11 PM

Mate i ain't counting my chickens..... although old mate here has been wonders with out a doubt, im a long way off. You have no idea how excited i am about this build.

Sent from my SM-P600 using Tapatalk

nissannewby

24th June 2015, 09:30 PM

Mate your a legend. Now. Anyone got one of these?

Sent from my SM-P600 using Tapatalk

I think i have a set of these. Also the mount brackets.

jff45

24th June 2015, 09:55 PM

I think i have a set of these. Also the mount brackets.

Never rains but it pours.. :)

mudski

24th June 2015, 11:29 PM

I think i have a set of these. Also the mount brackets.

You wouldn't have a glow plug timer too for GU? The glow relay is the same as the ZD one so thats sorted...

jff45

25th June 2015, 06:54 AM

You wouldn't have a glow plug timer too for GU? The glow relay is the same as the ZD one so thats sorted...

I bought an OEX timer off Ebay and a 100 amp relay from Jaycar.

mudski

25th June 2015, 08:52 AM

I bought an OEX timer off Ebay and a 100 amp relay from Jaycar.

Yeah I was thinking of that, but though if I can get the right one cheap enough, less hassle as it will just plug in. I'm trying to streamline this build as much as I can....