carsurgeons
18th May 2015, 07:16 PM
i dont know if this will help anyone but i have 2 gq patrols and both their clocks didnt work. so i removed them , just had to pull the panel out far enough to get stumpy phillips in to remove clock. the panel has 4 screws at the top vents,4 screws from the sides and 1 behind ash tray. clock has 2 screws and comes apart pretty easy. both of mine just needed one resistor re-soldered. this is shown in pics.5810958110the solder joints looked okay but after being re-soldered., the clocks work fine.