View Full Version : cleaning the intake
tristo89
9th May 2015, 09:05 PM
hey guys pulled the intake manifold off my 2002 patrol zd30 engine cleaning for egr blocking plate but there is a lot of build up on the head its self any ideas as to how to clean that without getting inside the cylinders.
mudski
9th May 2015, 11:12 PM
Very carefully. I will be doing the same in the coming month. The head on mine is quite dirty too. I might hit it with the karcher first.
Hodge
10th May 2015, 08:39 AM
I think people soak it in kero overnight or something like that... In the morning everything should just fall off supposedly.
mudski
10th May 2015, 09:54 AM
He's talking about the head itself Eric.
Heinzy
23rd October 2015, 03:57 PM
Hi tristo89, did you find a way to clean the head out mate
SupRob
24th October 2015, 10:16 AM
I wouldn't touch in ports on the head unless the head is coming off :/
High pressure Hot Water works way better in cleaning then any chemicals then chuck in a parts washer :)
Rob,
morton2478
29th February 2016, 07:07 PM
Can any one tell me what other gaskets are needed besides the inlet manifold gasket to do the manifold clean as i would like to get what i need in advance please
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.