View Full Version : cranshaft TB48 in a TB45e engine ?
lebroussard
16th April 2015, 01:16 PM
Hello,
I found a PPM kit 112 mm stroker for a TB48 is it possible to fit it on a TB45e engine ?
Thanks
Alitis007
16th April 2015, 03:14 PM
I'm not sure if the crank is similar or the bore is close but the tb48 is a dohc engine and the tb45 is a push rod motor fyi
lebroussard
16th April 2015, 06:07 PM
I'm not sure if the crank is similar or the bore is close but the tb48 is a dohc engine and the tb45 is a push rod motor fyi
Yes that why I am not sure too.
I just checked the bore who is is similar and the bearing.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.