what castor bush for 3"

[luvpsi]

before anyone says it i know i should get drop boxes but at the moment thats out of the question with my wallet at the moment. however i need castor correction for a 3'' lift badly as I'm having bad wandering problems and i have to drive a road where trucks have damaged it badly daily. what castor correction bushes should i get for a 3" lift. please note this will only be a temp fix for 6 months at the most

[BigRAWesty]

Well really anything is going to cost you the same, if not more than drop boxes.
If you go bushes, they are cheaper but install will cost you.
Then caster plates. Again, similar price to drop boxes.
And then drop boxes. Simple and self install.

So really. Your either stuffed for 6 months or you just buy the drop boxes.

[luvpsi]

Install on bushes will cost me nothing

[BigRAWesty]

Ow ell if that's the case grab some 3 degree offset bushes.

[luvpsi]

Cheers thanks mate any in particular

[nissannewby]

Cheers thanks mate any in particular

Not if they are only going in for 6 months.

General rule is 1 degree for each inch of lift.

[luvpsi]

Cheers fellas

[BigRAWesty]

I'm a bit unsure though on re using stock bushes after pressing them out.

[luvpsi]

Stock bushes are stuffed anyway

Can't find any 3 degree bushs online know where to get any

[BigRAWesty]

Stock bushes are stuffed anyway Can't find any 3 degree bushs online know where to get any

They ain't very popular so not surprised really.
A 2 degree won't be perfect but 10 fold better than nothing.

[luvpsi]

Cheers I found some cheap Chinese ones for 70 bucks not sure about them tho

http://www.ebay.com.au/itm/3degree-Rubber-Offset-Castor-Correction-Bush-Kit-Patrol-GQ-Y60-GU-Y61-Radius-Arm-/131090304702?pt=LH_DefaultDomain_15&hash=item1e85974ebe