How to change reverse bulb on GU patrol

[JME_GU]

I think I've got a blown reverse bulb but I can't figure out how to change the bulb, any tips?

[threedogs]

you only have one T20 reverse globe check as most sockets are dummy lights for the OS market

[Bigcol]

step by step, easier to explain
open rear doors
left hand side is small panel near door hinge, take that out
10mm socket, with extension bar........ remove 2 bolts (top and bottom - not middle one) to hold tail light assy
out side, using a LARGE flat blade (knife... not pointy one - screw driver etc wrapped in some cloth, not to damage the outside panel) gently pries the "front edge" of the light assy - there are 2 "ball like" plugs that go into the body to hold it into position
catch light assy before it hits the ground or pulls the wires out.......

there is your globes........

install reversal of removal

cheers