How to wire bull bar indicator/park lights

[JME_GU]

I have just bought a second hand alloy factory bull bar for my 98 GU, the bar has indicators and park lights in the bar with a small three pin plug behind each light cluster. The guy I bought it off said that there would be a plug just sitting there waiting for me to plug in the bull bar lights, however I can't find this plug. Is there actually a plug or is this guy FOS?

[the evil twin]

Have you popped out the main light assy from the guard and had a look behind?
I have found the repeater cables stored up there on occasion.

[JME_GU]

No, I haven't done that. I took off the small trim panel at the bottom of the headlight but couldn't see anything there. How do the lights assemblies come out?

[mjr350]

There's extra wiring all over the gu. Might be taped to a loom somewhere.

[lucus30]

When I did mine for my GU bullbar I didn't find any plugs. I ended up cutting the plug off and soldering into the existing indicators/park lights. Easy enough to do with a good soldering iron

[threedogs]

If you do splice into the OE wiring please solder and use heat shrink and/or tape.
Dont use scotch loks they will fail

[JME_GU]

My GU is a very early one, the stereo harness looks a lot like GQ. Maybe the headlight wiring is GQ too, did they have the repeater cables?