New shopping list from meetup

[HuskyInAuz]

Okay, looking at;

Rear bar with spare and jerry can holder.. Any opinion on Raslarr?
Metal bull bar with winch holder versus existing ally.. Suggestions?

Mamba TD05-18g turbo will probably be ordered tomorrow, then I need to find a tuner in these parts.

[MudRunnerTD]

Kris has a Raslar rear bar and Winnie has a bit of Raslar gear.

[BigRAWesty]

My bull bar may be up for sale soon.
Just an option... ;-)

[HuskyInAuz]

I noticed the Raslar rear bar on Kris's, didn't on Winne's. Just wondering if anyone else had their kit.

BWesty, what mfg/model is your bar?

I'm off to the old country for springtime farm chores first week of March, so not a lot of time to find and install something.

[BigRAWesty]

91 gq. Here's a picture

[rusty_nail]

91 gq. Here's a picture

he owns a GU mate!

[Hodge]

Raslarr rear bars are a good bit of kit. If I was to get a rear bar, my money would be there I think.

[happygu]

I don't mind the Raslarr bar as well .... I think it is amongst the best looking bars on the market.

[growler2058]

Winnie's Rasslar had the powder coat peeling from putting a thong on it!! And was packed with washers.

[Winnie]

Okay, looking at;

Rear bar with spare and jerry can holder.. Any opinion on Raslarr?
Metal bull bar with winch holder versus existing ally.. Suggestions?

Mamba TD05-18g turbo will probably be ordered tomorrow, then I need to find a tuner in these parts.

Hey, I have just got a rear bar and sliders from raslarr and I cannot recommend him at all. The product is good but he has too much work on and his heart is not in it. Attention to detail is lacking

[HuskyInAuz]

Hey, I have just got a rear bar and sliders from raslarr and I cannot recommend him at all. The product is good but he has too much work on and his heart is not in it. Attention to detail is lacking

I came in late in a conversation when you were talking about someone's lack of attention to product at the meetup, I have been wondering if Raslarr was who you were talking about.. question solved, problem not ;)

[MudRunnerTD]

Kaymar have a second range of rear bars which are a fair bit cheaper to buy than their standard range. They look good and I checked them out at the 4wd show. From what I can gather the primary difference between their standard product and the new range is that with the cheaper range you retain the factory tow bar and there is no Tow point incorporated into the bar saving a packet on a engineering if say.

Check them out.

[BigRAWesty]

he owns a GU mate!

Ow. When Darren mentioned winnies bar work I just assumed.
To easy then.

[HuskyInAuz]

Kaymar have a second range of rear bars which are a fair bit cheaper to buy than their standard range. They look good and I checked them out at the 4wd show. From what I can gather the primary difference between their standard product and the new range is that with the cheaper range you retain the factory tow bar and there is no Tow point incorporated into the bar saving a packet on a engineering if say.

Check them out.

Will do! That sounds like a better price point/solution but I do have a problem going through ARB

I'll be looking at the TJM front bull bar unless there's a big problem with them.

[happygu]

I just had a look Darren....

http://www.kaymar.com.au/ozbar/index.php

Interesting ... they must be hurting a little from the cheaper bars on the market

Mic

[HuskyInAuz]

I just had a look Darren....

http://www.kaymar.com.au/ozbar/index.php

Interesting ... they must be hurting a little from the cheaper bars on the market

Mic

Yup, that's what I'm looking for, now to see how well they sharpen their pencils. Now for the front bar and turbo