5.7 gm diesel 350,tried and tested

[frogdoggq]

gm 350 5.7 short leg diesel,perfect fit in gq,has won most challenges,do you have one and parts to refit,supercharged or turbocharged,manulised turbo 400 behind it,LSD front and rear.HELLO forum

[the evil twin]

Hello right back at ya.

Unfortunately your post has caused my Babel Fish to have a nervous breakdown... perhaps popping over to the intro thread may help us get to know you?

[frogdoggq]

not flash with computers,tried admin,HELLO,what would you like to know.phil

[Ben-e-boy]

not flash with computers,tried admin,HELLO,what would you like to know.phil

Is the 5.7L a better boat anchor than the 6.5L?

[frogdoggq]

JUST WASTED HALF AN HOUR to get back,just turboed 5.7 with gm8 turbo,WOW!!!THIS IS NOT SPAM,tough to negotiate forum,so ,have cast bellhousing for td and tb to turbo 400 and manulised,will also take t 700.now have fitted 5.7 gm diesel now with turbo.just removed 5.7 supercharged with 2008 mustang supercharger due to low oil pressure,custem built extracters and manifoulds,only to finish intercooler to test run,by the way,machined heads to take roller rockers to match roller lifters,SHES A RUNNER.
and she is a goodwrench dx350,have 3 goodies and 8 gms,store room of parts.0419155156 phil

[Ben-e-boy]

WOW! How long will the crank last with that 5.7. Considering they weren't even balanced from factory, did you upgrade the TTY head studs they are know to shear even naturally aspirated.

[frogdoggq]

goodwrech set up the crank,just try to pick it up,mate you flood the shells with oil before you lower it in,you think the hi nickel block is heavy,pick up the crank,best you run one before you knockit,put it together wright and no one could knock the smile of your face,set your truck up wright and you can watch the knockers coming up behind you.by the way .nice ute.capeable.where is your playground?

[Woof]

So are you selling it or just letting us know about it, go here for the introduction section mate http://www.nissanpatrol.com.au/forums/forumdisplay.php?2-Introductions

[frogdoggq]

was realy only looking for a td 42 inlet manifould,if available please call phil 0419155156

[Woof]

was realy only looking for a td 42 inlet manifould,if available please call phil 0419155156

Hi Phil, replied to your PM mate