PDA

View Full Version : Temperature issues rd28 GQ



catchinjack
9th December 2014, 09:08 AM
Hey guys,

Around town the temperature is ok, when I get on freeway and have to climb hills the temp is getting up to 2/3 to 3/4 but quickly goes back down to half when on flat again.

The head is not cracked, been checked
Clutch fan is apparently ok
Radiator replaced
Thermostat replaced with aftermarket but will be putting genuine one in.

Only thing I have on bullbar is lightforce 240's.

At a loss really as to what it could be, the timing belt was done recently with a full kit and new water pump.
Any ideas would be greatly appreciated as it never used to get that hot on hills and it's only doing it at 80km/h+

Wine_maker
9th December 2014, 09:25 PM
Hi!
Mine brick makes the same things.
I think its normal for rd28. But if I can find the right speed for current hill angle and if I hold it the temp is under control and not rising more.