Doing the swivel hubs this weekend, anyone want to help?

[Covo71]

Finally got all the things to do the swivel hubs etc this weekend. Bit worried I am going to stuff it. Anyone in Bathurst that wants to get their hands dirty with me. lol.

[Bloodyaussie]

Its not hard mate and as I have said time and time again lay everything out in order you pull it off and I prefer to clean each part as I take it off... this may take longer at the start but makes putting it back together much easier.

There is nothing that is hard about this job only that it is very messy and you will need heaps of rags.

Make sure you have both types of grease also.

[Winnie]

Its not hard mate and as I have said time and time again lay everything out in order you pull it off and I prefer to clean each part as I take it off... this may take longer at the start but makes putting it back together much easier.

There is nothing that is hard about this job only that it is very messy and you will need heaps of rags.

Make sure you have both types of grease also.

Good advice there. When we say heaps of rags though, really, HEAPS of rags!

[BigRAWesty]

Do your self a favour and pop into blackwoods or similar and buy a $40 bag of rags. You'll need lots.

Also check the rebuild thread. Heaps of info and pics

[Covo71]

Already been to lifeline to get the rags