Rear sliding windows

[daz172]

Does anybody know how to get out the rear sliding windows? Like the whole bit, seal and all

[Clunk]

They pretty much just push out with a bit of gentle force, you might want to use a blunt edge tool to help lift the seal over the lip to start with

[daz172]

Ok thanks, the gentle force just on the frame part in guessing??

[Bigcol]

I found getting some dish washing liquid, and wiping it around the inside of the window frame - on the rubber

made it easier to slowly gently force the windows out........

there is / was a write up about this on here I think from memory - ages ago -

[Clunk]

I found getting some dish washing liquid, and wiping it around the inside of the window frame - on the rubber

made it easier to slowly gently force the windows out........

there is / was a write up about this on here I think from memory - ages ago -
yeah can't remember if biggqwesty put one up........ will have a looksy

edit.............. his was just info about putting new ones in, buggah, will keep searching


didn't worry about dish washing liquid when I grabbed the ones out of Mike's old Q, they pretty much popped out

[BigRAWesty]

Grab a mate. One inside pushing out. One to catch.
Start at the top rear corner as this has the least radius. Push out on the glass a rubber and frame will follow

[daz172]

Ok thanks heaps, and I'm guessing reinstalling is reverse of removal??

[doka404]

Ok thanks heaps, anhttp://m.youtube.com/watch?v=QvcJ_lU_VpQd I'm guessing reinstalling is reverse of removal??

Pretty much, but run a piece of rope (I use paracord) around (inside) the seal, get a mate to hold the widow up and start the seal , then from the inside pull the rope gently to flip the seal over the car. If that makes any sense

This might explain what I mean better http://m.youtube.com/watch?v=QvcJ_lU_VpQ

[daz172]

Pretty much, but run a piece of rope (I use paracord) around (inside) the seal, get a mate to hold the widow up and start the seal , then from the inside pull the rope gently to flip the seal over the car. If that makes any sense

This might explain what I mean better http://m.youtube.com/watch?v=QvcJ_lU_VpQ

Good video, thanks every very helpful indeed

[GQsweep]

I did this a little while ago but ended up putting the process at another car forum. The restrictions here made it all too hard.

http://www.mgexp.com/journal/sweep/9003

[Dradyz]

Very surprising how easy the windows pop out, gotta think how they stay in