PDA

View Full Version : For the SE Qld guys/girls



NP99
16th September 2014, 07:32 PM
This could be good value....

lhurley
16th September 2014, 07:37 PM
That could be very handy.

nissannewby
16th September 2014, 07:43 PM
Dammit should have been doing weight training so I could carry a gu diff and each hand lol

megatexture
16th September 2014, 08:03 PM
Mm what would be good value to walk out with... I bet they have fark all there.

nissannewby
16th September 2014, 08:06 PM
Gu steering boxes lol could make yourself 400 dollars

megatexture
16th September 2014, 08:12 PM
We should all go pull the cab off and walk out with a gu ute

gaddy
16th September 2014, 10:04 PM
Dam shame I will be on Fraser :):beer::beer::beer::beer:

lhurley
16th September 2014, 10:11 PM
Im heading there with some mates. Its all 1 person can carry. Not sure what we will find, but im sure we wont leave empty handed.

megatexture
16th September 2014, 10:29 PM
Maybe go check it out the day b4 so you don't waste time looking and get straight into it on the good parts

megatexture
16th September 2014, 10:30 PM
I'd grab 2x diff centres if they had the right ring/ pinion I want

lhurley
16th September 2014, 10:38 PM
Maybe go check it out the day b4 so you don't waste time looking and get straight into it on the good parts

That's a good idea. Make a stash :p

megatexture
16th September 2014, 10:49 PM
Yea and put some 4:6s away for me lol

NP99
16th September 2014, 11:08 PM
Grand daughters birthday party or wreckers for the day......like I have a choice!!! :)

megatexture
16th September 2014, 11:14 PM
Well see you there then lol

nissannewby
17th September 2014, 07:43 AM
Yea and put some 4:6s away for me lol

Hm you want 4.6 I want 4.3. I have a 4.6 here that I would gladly swap :)

NP99
17th September 2014, 09:32 AM
It's one way to move stock in a stalled economy......

lhurley
17th September 2014, 04:07 PM
Went and checked it out this arvo as its only 10 mins from work. There was 1 Patrol there, no suspension, engine, and the interior was gutted. Still going on sat with a mate as he was frothing over old pajero stuff.

megatexture
17th September 2014, 05:06 PM
Hm you want 4.6 I want 4.3. I have a 4.6 here that I would gladly swap :)

Whats a 4:3 get you, Same goal as me?

megatexture
17th September 2014, 05:07 PM
Went and checked it out this arvo as its only 10 mins from work. There was 1 Patrol there, no suspension, engine, and the interior was gutted. Still going on sat with a mate as he was frothing over old pajero stuff.

More proof you have to be sick to like paj lol

nissannewby
17th September 2014, 06:22 PM
Whats a 4:3 get you, Same goal as me?

Yeah I have 4.11 and want 4.3. I only have a rear centre but could work something out with the likes of me paying for a front for you.

That is if yours has 4.3s in a 233 fashion.

megatexture
17th September 2014, 06:41 PM
Genuine parts? Do You have just the gear set or you thinking about a centre swap ? Just thinking of its a diy or pro job thats all

nissannewby
17th September 2014, 06:56 PM
I have a complet 4.6 lsd rear here so it will just be a centre swap. And 100% genuine.

megatexture
17th September 2014, 07:25 PM
If they are both genuine I'll be dead keen. Maybe you can help fitting lol if not I'll hit up your mate and render his fence lmao where would I look to see if its 233 ? Compliance plate ?

nissannewby
17th September 2014, 07:27 PM
I only have the rear although I could possibly have a front but I will need to confirm the centre is the same.

Yes the compliance plate will have it. Just check the trans axle code.

NP99
18th September 2014, 07:42 PM
Went and checked it out this arvo as its only 10 mins from work. There was 1 Patrol there, no suspension, engine, and the interior was gutted. Still going on sat with a mate as he was frothing over old pajero stuff.

If you had the capacity to carry out a set of rear ea falcon calipers I'd buy them off you mate

lhurley
18th September 2014, 07:54 PM
If I can find one, I'll see what I can do. I don't remember there being many ea's there. Mostly au-ba/f.

Do the later model ones fit? That you know of?

NP99
18th September 2014, 08:11 PM
If I can find one, I'll see what I can do. I don't remember there being many ea's there. Mostly au-ba/f.

Do the later model ones fit? That you know of?

Thanks mate. I think just the E series are inter changeable.

lhurley
18th September 2014, 08:15 PM
Thanks mate. I think just the E series are inter changeable.

I'll see what I can do

NP99
19th September 2014, 09:57 PM
While you guys are swinging spanners I'll be on a hot tin roof installing a sail shade for the grand daughters party. What can go wrong? My wife and daughter will be providing specialist advice to my son in law and I :)

lhurley
19th September 2014, 10:00 PM
As long as they are handing beers up with the "advice" then you'll manage

lhurley
20th September 2014, 06:40 PM
If you had the capacity to carry out a set of rear ea falcon calipers I'd buy them off you mate

Unfortunately i couldnt grab your brakes. Sorry bloke. There was actually a few E series there, most were missing rear brakes but i did spot one with them still if your still interested. they seem fairly cheap there.

As we were signing in, the guy at the counter said 15 mins left so we ran off and grabbed what we could.

NP99
20th September 2014, 10:47 PM
Thanks mate, might head out next week and see what I can do.

megatexture
22nd September 2014, 06:56 PM
I only have the rear although I could possibly have a front but I will need to confirm the centre is the same.

Yes the compliance plate will have it. Just check the trans axle code.
I think were out of luck ?

nissannewby
22nd September 2014, 10:54 PM
Nope hg43 is what we are after :)

megatexture
23rd September 2014, 12:11 AM
Ohh thought I was looking for 233 lol