PDA

View Full Version : caliper guide/slide pins, boots and bushes for same, and a bolt wanted please.



Silver
21st February 2011, 11:12 PM
Any suggestions on where to get these apart from buying a whole second hand or new caliper - for a GQ/Y60.

I'm also after one of the bolts that goes into the bottom slider on the front - it put up a mammoth struggle before submitting to be removed, and now looks a bit second hand. Will be ok up the top with some care I think.

I have seen the rubber bits in a caliper rebuild kit on line for just under $90, but, so far as I know at this stage, don't need to rebuild the caliper :-)

I can probably clean them all up well enough to use again, but would be nice to get new ones.