Pulsar n16 door lock problem

[samer]

Hi guys
Im new to this forum. I hope you guys can help me out with my n16 problem. I have pulsar n16 with central lock problem i took off the actuatuion unit thats under the glove box and put it back on then the central locking for all doors stopped working and only drivers door unlocks and locks when the key is used. Any one had that problem and does any one know how to fix the problem? Thanks in advance guys

[NissanGQ4.2]

You do relise this is a dedicated Patrol forum

[Yendor]

Why did you disconnect it?

Start by checking all fuses.

When you disconnected and reconnected the control unit you may have damaged the soldered connection between the pins and the printed circuit board.

Remove the cover and inspected the joins, if possible run a hot soldering iron over them.