Waidri
14th July 2014, 11:02 PM
Hi all, so I'm at the stage of reassembling my zd after a rebuild.
Now I've managed to search my way through most issues so far.
When I stripped it everything was bagged and labled, however now I've seen a 10mm hole at about 2 o'clock to the injector pump gear as your looking at it from the front.
This hole looks to have a passage and I can get bent fuse wire down there,
But it's no normal thread I've tried 3 different fine threads (for information purposes) but no luck, I've been gentle to not shag the hole. From a pic I've found it looks like a hex shaft coming out from it,
I am thinking the last rebuilder didn't put it back in.......
https://m.facebook.com/groups/129316063795995?view=permalink&id=766025586791703&comment_id=768448779882717&ref=m_notif¬if_t=group_comment&actorid=529712064
The link has a couple of pics on it. Can anyone say what is ment to go in here please.
Thanks guys
Now I've managed to search my way through most issues so far.
When I stripped it everything was bagged and labled, however now I've seen a 10mm hole at about 2 o'clock to the injector pump gear as your looking at it from the front.
This hole looks to have a passage and I can get bent fuse wire down there,
But it's no normal thread I've tried 3 different fine threads (for information purposes) but no luck, I've been gentle to not shag the hole. From a pic I've found it looks like a hex shaft coming out from it,
I am thinking the last rebuilder didn't put it back in.......
https://m.facebook.com/groups/129316063795995?view=permalink&id=766025586791703&comment_id=768448779882717&ref=m_notif¬if_t=group_comment&actorid=529712064
The link has a couple of pics on it. Can anyone say what is ment to go in here please.
Thanks guys