gq pinion BRG

[RED]

hi all, a need your help, doing the frunt pinion bearing on my GQ, pinion is sloppy so time for bearing to be replaced, what i need to know is there any prelods i need to know, and where i could by bearings from??

[Bigrig]

hi all, a need your help, doing the frunt pinion bearing on my GQ, pinion is sloppy so time for bearing to be replaced, what i need to know is there any prelods i need to know, and where i could by bearings from??

Tony - all yours mate for both translation and response - don't know what prelods are?

[YNOT]

Check "PD" section of the GQ service manual, it starts on page 606 for a full run down. All the preloads and torque settings are covered in that section.

Tony

[Bigrig]

Check "PD" section of the GQ service manual, it starts on page 606 for a full run down. All the preloads and torque settings are covered in that section.

Tony

Preload - got it, sorry ... wasn't with it ...

[RED]

thanks tony got diff apart last night and outer brg seized