Mikk's GR (GU)

[Mikk]

Since I'v presented myself I can also present my ride.


Its an -04 Y61 30Di wagon. with 200k KM on the counter. Its registred as an cargo vehicle and only have 2 seats. (norwegian rule to avoid tax)
When I got it. pretty standard.
46321
First uppgrade. 33"x12,5"x16" Procomp xTerrain.
4632546322

I have fitted a 2din stereo with a new speaker front sett. the originals where blown and the radio where crap.
I also stitched a new lether stearingwheel cover. (eBay stuff)
BTW the GR is the left hand verson of the GU.

[growler2058]

Looks good mate
Now to spend your money for you :)
2"lift
Bar work
Lockers.................

[threedogs]

Looking good easy to deck the rear out too.
I only have one rear seat, as I pulled one out to fit my Fridge
You'll need to look up on how to fit a manual boost controller etc or NADS
You have the same as me mine is 5/04 build and have 205k on the clock.
Good buy by the look of it, Watch the intercooler if its oily chances are its leaking.
Here in Aus we replace with OE tigged welded one

[Mikk]

Thanks guys.
I have alot of plans for this on, but everything comes down to money.
First thing to do is installing a lift kit. The higest lift witch can be aproved over her is 2" and I think that will look great.

The rims im using now have the original offset so the front tires ar touching the radius arms.
So I was about to mount this spacers last wekend. 2". but don know howe I ended up with a 108mm diameter sett... eBay you fool me again.:frown:
46338
Unforunately I came across som other errors assvel. :animierte-smilies-f so I put the spacers on hold.
On the pluss side it gives me a good reason to get that lift kit.
4633946340

[Mikk]

A little uppdate.
2" kit, Stearing damper, caster bushings and stabiliser bushings is in the mail.
It will be drivable again in no time.

[Mikk]

Been a wile since last uppdate.
This car is giving me some more work that I didnt want.
Have just blockd the EGR innlett, and installed a oil catch can for the ventilation fumes.
49534
The trottleboddy and innlett hadd a tick layer of BSS(black sticky stuff).
49530495314952849529
During the work with the EGR and catch can i notised that the IC have oil stains on the edges, so it it is time to change it to an Tig velded one like @threedogs advised.
Noticed a noher thing also, the crossmember under the radiator is rusty, realy rusty. The radiaor has sunken 1cm into the crossmember.
4953249533
Its lovely with an old car :)

[Mikk]

A little uppdate.
2" kit, Stearing damper, caster bushings and stabiliser bushings is in the mail.
It will be drivable again in no time.
Looks like I was a bit optimistic when I started with this uppgrade.
Note to self. Do not start with uppgrades the same time your building a hous and your first child is born.


Sent fra min SM-G935F via Tapatalk