Dash removal

[Shaft10]

Hi fellas I'm tryin to get the cover over my dash the centre part where the clock and radio etc is. I've take the 4 obvious screws out but it still feels like I've missed something. Any help would be appreciated.

[BigRAWesty]

If you flip up the 2 center air vents there is another lot along the top.

[Shaft10]

Ah I knew there must be some somewhere cheers mate

[GQ TANK]

There 2 on each side, couple behind the ash tray and at the top of both top air vents.

When you put it back in make sure you plug in all the cables - if you forget to plug in the cable for the emergecny flasher button - you wont have indicators

[Shaft10]

Ok thanks fellas

[Dradyz]

But late I know but it's a pretty easy job with the right tools and know how

[noel_w]

Silly question I know but do you need to remove the lever ends off the air duct levers before you take the dash off?
Need to take mine out soon to fit a UHF.

[Winnie]

Silly question I know but do you need to remove the lever ends off the air duct levers before you take the dash off?
Need to take mine out soon to fit a UHF.

Hey mate, no you don't.

[noel_w]

Thanks Winnie, will make it easier for me to attempt it now.

[no eye deer]

Bare in mind- you will lose 1 screw per removal. LOL!

[GQ TANK]

Yep - agree - you will lose 1 screw per removal. LOL!