Wanted GQ Rear Caliper Slide Pin/bolt

[Crate]

Hoping someone can help me, doing a disc conversion on my GQ and found a small problem I am missing the small (10mm head bolt) that goes through the caliper slide bush and also that bush on one side. I will try and get a photo up. I am hoping someone will have one rear caliper floating about for spares that I can take the parts off? Craig 0421 864 695, I live SE Melb but happy to pay postage.

[MudRunnerTD]

I almost certainly have what you need mate. Just need to get my hands dirty. But for sure. Post a pic of the part you need.

[Crate]

That would be awesome mate! Its two of these, that is a 10mm head, and one of the slide bushes that goes over this. I could prob make do with just one of these bolts this one just needs a straighten.

[MudRunnerTD]

Leave it with me a few days mate, crook as a dog but I will have a look when I can. I actually threw some calipers away when I did the GU swap out but I am positive I still have some bits in a box, I'll get back to you.

[Crate]

Thanks mate, get well soon! I don't meant to be pushy but I am trying to get this done before the long weekend so if you could have a look this week that would be really appreciated.

[MudRunnerTD]

He mate I have a couple of rear calipers here, both are complete. Do you still need this part? Is it the slide bolt? Can you post a pic showing where it goes in the caliper?

[Crate]

Yeah still chasing them mate, ill take a photo tomorrow

[Crate]

If you look at the photo below you need to remove the bolt on the right to separate the caliper from the housing, then you will be left with the bolt I need (which is hiding under the blank on the left) sticking out of the caliper housing with the metal tube slide guide over the top, I need at least one of the bolts (two if possible) and one of the metal tube that goes over the bolt. Thanks mate!

45222