PDA

View Full Version : Wanted ECUTalk


Rickie3
12th May 2014, 09:11 AM
Anyone selling or know of a ECUTalk for sale please for 3 litre DI
threedogs
12th May 2014, 09:43 AM
Where are you Ricki, and are you sure ECUtalk will suit your model/year'If no luck email peter@ecutalk.com.au
Rickie3
12th May 2014, 10:13 AM
my bus is a 2000 model 3L DI, so yea not 100% sure if it would suit, just every now and then I get engine light on dash, and I want to see what code its throwing and remove the engine light from dash as its annoying
threedogs
12th May 2014, 01:05 PM
Could be something to do with fuel, where are you If close you can plug in mine.
threedogs
12th May 2014, 05:53 PM
Bumped, anyone know where Rickie is from ?
Pokey
12th May 2014, 07:09 PM
From Burnie in Tassie I believe
Rickie3
12th May 2014, 08:58 PM
From Burnie in Tassie I believeyep thats the place
Rickie3
18th May 2014, 09:45 AM
Still looking for one
threedogs
18th May 2014, 09:53 AM
Hi Rickie might be worth buying one for any future errors if any.
From memory only $235 I think
Rumcajs
18th May 2014, 10:03 AM
If you are only after occassional use and have MS Windows operated laptop/netbook just get the USB to Consult cable/interface and download ECUtalk software,
Cheers
Rickie3
18th May 2014, 02:19 PM
If you are only after occassional use and have MS Windows operated laptop/netbook just get the USB to Consult cable/interface and download ECUtalk software,
Cheersthe cable sounds the go, where can I purchase that from?
Rumcajs
18th May 2014, 02:43 PM
The easiest option is here --> ECUTalk interface (http://www.ecutalk.com/interface.aspx)

or make your own of you have time and like to do things yourself or have not enough funds, all parts are available somewhere on the Interwebz like cable, Consult plug and pins, USB to serial adapter/board....
You mileage will vary though.

Personally, I think for ZD30 owners this one of the best investment in the toolbox. Saves you time guessing and replacing things unnecessarily. Everyone should have that one.

Cheers
Rickie3
18th May 2014, 03:21 PM
i'll need the one with OBD11 plug?
Rumcajs
18th May 2014, 03:47 PM
Just look at the page I have linked to earlier. It show you exactly how each plug Consult or OBD2 looks like and where is their location.

Then look at yours and make decision. I believe that "fake" colored OBD2 plug was fitted on Y61 from Series 4 onwards.

So Consult plug bellow

44683 44687

and

OBD2 plug -->

44686

The plugs should located just above accelerator pedal behind the panel. You can see if you poke your head there.

Cheers