Doing my 85 L28 head gasket

[lee1300]

hey everybody, im doing the head gasket on my 85 L28 SWB just wondering if theres any threads i should look at?

[MEGOMONSTER]

hey everybody, im doing the head gasket on my 85 L28 SWB just wondering if theres any threads i should look at?

Try using the search bar to find what your looking for.

This is just the intros section and you may not get a response to your question, perhaps ask the question in the appropriate forum section.

Welcome mate, surely the best forum on the net. If you need it, you can get it, if you want to know it, just ask it. If you want to find it, go to the search bar for a universe of information. Enjoy the sights and sounds of the greatest show on earth

[Avo]

welcome matey,great info and advice here,enjoy your stay

[Sherro]

G'day Lee welcome to the forum mate.

[GQ TANK]

The trick is holding the chaine tensioner n place.


When I done my old l28 head, I found it was near impossible to keep the tesin on the chain. I ended up pulling the frobnt off to reset the chain tensioner. Some people have had luck using a piceng of wood to hold the chain - and I have heard people use a long screw driver to push the chaine temnsioner back in.

[threedogs]

Hi mate and welcome to the Forum,
jump in anytime and enjoy.

[Bo55gq tonka]

welcome to the forum :)

[Dhuck]

Welcome to the forum mate.

[my third 256]

hi and welcome to the forum a great mob of people here and a lot of very usefull information
best wishes with your patrolling
stephen

[bob petty]

use a stumpy screw drive on wire and wedg down in the timming cover before removing cam gear .
cheers bob