What have I done now?

[Ben gu8dx]

Hi All,

So just got the truck out of workshop with main work being egt gauge and boost gauge as well as wiring to UHF, hid spotties, 22" led bar, bullbar wiring to indicators and fog lights.

As I was driving out of the workshop my ABS, VDC and TC lights come on and stay on. If you turn the car off and on it resets but as soon as you put it in drive and start to take the foot of the brake the lights come back on.

Any help is really appreciated as I am about to set sail for Ayers Rock in under 48 hrs but with my latest event I might be paddling my bike there.

Thank you for your help in advance.

Cheers Ben

[growler2058]

Bump........

Sent from my iPhone using my thumb

[threedogs]

Yendor may be your man for this, is it related to any of the work done
I would take it back to who ever wired all your accessories

[Hodge]

Someone tapped to wrong wiring somewhere, my best guess .

[happygu]

Ben,

I think Hodge is on the right track with wiring .....

Did you do the work in your own workshop, or did you get someone else to do the work?

Mic

[Yendor]

It does sound like it might be related to the work that's just been carried out.

Do the brake lights still work?

Did the sliders also just get fitted?. If so, there's a main harness that runs down the LHS chassis. I would start by checking this harness, make sure it's not damaged or been squashed.

Check the harness and connectors to the brake pedal and accelerator pedal switches. Also check the harnesses and connectors to the wheel speed sensors.

Long shot, but make sure the UHF aerial lead has not been run near the ECU.

If all the above looks OK you will need to check for trouble codes

[Marmel]

I would be driving it back to the workshop, assuming you paid someone else to do the work?

[threedogs]

Any up dates ?????