Log in

View Full Version : Scan gauge



kevin07
10th April 2014, 08:28 AM
as the ultragauge crapped itself yesterday its time for a scangauge could someone show me which one to buy, and you can believe wife took off in car this morning and there it is engine light (bloody hell)

Maxhead
10th April 2014, 10:10 AM
This is the one I had on my last Patrol. http://scangauge.com.au/scangauge2/

It was best bit of gear on the troll:)

the evil twin
10th April 2014, 03:54 PM
What he said ^^^^

Bloodyaussie
10th April 2014, 05:18 PM
Do they work on GQ petrols???

threedogs
10th April 2014, 05:29 PM
Is your GQ OBD11 compatible, with the 16 pin plug under the dash on drivers side,
Does it have an ECU

lhurley
10th April 2014, 05:31 PM
Do they work on GQ petrols???

Website says it only works on common rail diesel patrols

NissanGQ4.2
10th April 2014, 05:46 PM
Do they work on GQ petrols???

Jono, from my understanding and from the look of there Compatibility List - NO


I believe one of these: http://www.ecutalk.com/ would work, you would have 2 get the nissan consult port model and I would ring / email them first 2 confirm it will work.

The GQ's are very limited 2 what info is passed through the ECU so you would want 2 work out what info you are looking at obtaining first and then checking what the gauge actually displays.

Cheers

Toddie

Hodge
10th April 2014, 05:53 PM
Compatibility

43119

Hodge
10th April 2014, 06:00 PM
I have one and it shows a lot of stuff. Still fine tuning the fuel side of it, but it works great.

the evil twin
10th April 2014, 11:44 PM
Do they work on GQ petrols???

No... definitely not.

They only work on ZD30 CRDs... the Di's TDs etc all need ECU talk