Panhard rod adjustments.

[sil3nt_dr3ams]

I'm curious how other people adjusted rear panhards to suit their
lifts ?

[Dhuck]

measure the distance between the inside edge of the tyre/rim to chassis.

[sil3nt_dr3ams]

I went off straight edges across the surface of the disk brakes. Added both of the measurements each side then divided that number by two. Then adjusted the pan hard to suit, equal numbers either side

[89gqpatrol4x4]

inside of tyre to chassis, Jack it up adjust, let it down. I rolled the car back and forth a little just to help it settle then measured.

[liftlid]

I'm curious how other people adjusted rear panhards to suit their
lifts ?

How much lift are you running?