PDA

View Full Version : Projecta Dual Battery Kit



SonOf
26th March 2014, 08:03 PM
Hi Guys,

When I bought my TD42 it was fitted with a dual battery system (http://www.projecta.com.au/site/DefaultSite/filesystem/images/Power_Management/Isolators/DBC150TK_product-L.jpg)

As per the link above. I have noted today that it has stopped working and I have checked all the fuses and run the multimeter over it to verify the issue is in the actual control unit.

Just wondering if anyone has the same unit or has experienced any issues with this unit etc. I have not taken it out of the car yet but will look at pulling it apart to see if I can fix it but most likey will need to get a new one. Only issue is they do not sell them just with a controller so will get all the cabling again. If this is what I have to do, I will post up to see if anyone wants the cable mine is fully kitted

the evil twin
26th March 2014, 09:11 PM
If the unit is knackered use the same cable and replace it with a Redarc or similar
$90 on Ebay

meh
26th March 2014, 09:23 PM
Have the same problem. Doesnt charge up the second battery

meh
27th March 2014, 09:57 PM
So today I disconnected both the wires into the unit and left it for 5 minutes. Plugged it back in and it is now working fine !!