Lightbar mounting

[beexy]

May be a silly question, but it wouldnt be my first one. How does everyone mount their light bars to their bull bars? Is there a specific mount kit you get?

[the evil twin]

I use the mounts that come with the Light Bars.

Sometimes you jay have to purchase or fabricate a spacer or a right angle bracket

[threedogs]

Most I think fabricate a long flat bar say 40mm x 4mm bend at each end to suit the light bar. two pieces of flat steel out from aerial mount

[Clunk]

May be a silly question, but it wouldnt be my first one. How does everyone mount their light bars to their bull bars? Is there a specific mount kit you get?

Depends on what part of the bar you're going to mount it on. My 6" bars came with feet and I chose to mount mine as shown

40094

If you're going to fit on the round bar work, then you may need some circular clamps

[rottodiver]

I have "axia alloy" clamps..... they are awesome.... not cheap but well worth it i reckon!!!
i have a 42 inch light bar across the top of my bar!!!40107

Scotty

[BigRAWesty]

Paul from Led light co has pipe mounts..

They look good and would be solid..

[firm351]

I have "axia alloy" clamps..... they are awesome.... not cheap but well worth it i reckon!!!
i have a 42 inch light bar across the top of my bar!!!40107

Scotty


G'day Scotty,

Does having the light bar in that position have any effect on air flow to your bonnet scoop?

Paul.

[rottodiver]

G'day Scotty,

Does having the light bar in that position have any effect on air flow to your bonnet scoop?

Paul.

To be honest I could not tell you either way,
I have no problems with egt,s ( do have the egr blocked) and engine temps are always good so if there is an effect I haven't noticed it...

Scotty

[firm351]

To be honest I could not tell you either way,
I have no problems with egt,s ( do have the egr blocked) and engine temps are always good so if there is an effect I haven't noticed it...

Scotty

Good to know. Thanks mate.

[megatexture]

I drilled a 19mm ( what ever size your socket is)hole up under the tube so I could get a socket inside fitted the light bar, soaked inside the tube with penitrol then few hrs later a spray of fish oil then I put a rubber gromit in the holes, it looks really tidy and will be a major pain in the ass to steal.

[happygu]

My bar came with its own brackets, but I made up my own custom Stainless ones to make it harder to steal, and a little more discrete..

Mic