PDA

View Full Version : Coolant Flush TD42



Antznz
25th January 2014, 01:20 PM
Hi guys.

Need a little help with my coolant system.

I've drained the radiator via the drain on the RHS but the engine drain plug is completely seized. Tried a range of breaker bars, crc etc but it won't budge. I'm sure if I get two mates and both yank on it it will break free but most likely it will break.

Is there another way to drain the coolant from the block. By the way whoever put that drain where it is should be flogged. Not very handy…..

HELP

Antz

my third 256
27th January 2014, 09:23 AM
take bottom bose off and block hose then
pressureise system through radiator cap

CPOCSM
27th January 2014, 11:34 AM
Try tightening it first, then back it off. Had issues with this on minis and works every time. Please don't swing off it when you tighten it though...

Hooroo

Antznz
31st January 2014, 07:45 AM
Cheers fellas, always nice to get assistance and not just some flak from a cross the ditch....

slamnsam
2nd February 2014, 10:35 AM
you could also do a reverse flush through the heater hoses