Boost gauge plumbing

[ThomasWatson]

So I might be a noob at all this with it being my first diesel but I have blumbed the boost gauge into the intercooler pipe pre cooler like chazs one but the problem I'm having is where it run the other part so I can have my gauge on the drivers side near the door on top of the dash, I'm not installng a pillar pod as I find it distracting

Any of you guys with the ZD30 be able to enlighten me as to where your hose runs into the cab?

[boots]

Drivers side between the top of the throttle pedal and top of dash where there is a heap of other wires going through, snuck it in there .

[ThomasWatson]

Thanks boots i looked through a bunch of threads and couldn't find a straight answer

[threedogs]

Should be a large rubber gland, push a piece of welding wire through and you should be OK

[ThomasWatson]

I used a piece of my aerial as it doesn't work anyways and pushed it through the grommet that has the fuse box wiring running through it then pushed the tubing through and pulled the aerial piece back out