PDA

View Full Version : Installing new TPS



SKID
24th December 2013, 08:24 PM
The manualy only talks about ohms when installing a new tps, but breifly talking to an auto tranny expert in VIC he said to set it by volts, does anyone know what the voltage should be atclosed position and voltage when throttle openen?

Thanks in advance

NissanGQ4.2
24th December 2013, 08:30 PM
Have moved this into its own thread in the electrical section of the forum

Cheers

Toddie

SKID
26th December 2013, 11:42 PM
If I have it adjusted too little I get the lockup, unlocking all over the place, but can still get the system into diagnostic mode, and it unlocks as per the manual if I take my foot off the pedal. if I over adjust it the lockup problem almost goes away but can not get into diagnostic mode and does'nt come out of lock up when I take my foot off the pedal...

threedogs
27th December 2013, 07:19 AM
Make model and year ?????????????????????????????????????????????????? ??

Edit model and year lol

SKID
31st December 2013, 01:26 PM
Its an 89 TB42 ST with Auto. 4.2