G'day!

[gazman63]

G'day all,
I've got a 1989 ST GQ LWB with a TD42. I have had it about 15 years. Over the last couple of years I have been doing my own work on it. The old girl has about 440,000kms on her. I had the main rear seal start leaking pretty bad a couple of years ago so picked myself up a new (260,000km) engine and swapped it in. I am running a DTS turbo with around 12psi, 3" DTS exhaust. Just last month put a set of 16x8 sunrasias (neg 13) with 285/75 BFG A/T. Next job is to install 2" lift using Kings springs and Bilstein shocks that I bought a couple of weeks ago.
I've found this site really useful lately in getting advice on tricky issues and ideas. Thanks.
Gary

[Bloodyaussie]

Welcome aboard mate.....................

[AB]

Welcome to the forum mate, feel free to ask any questions.

[growler2058]

G'day Gary welcome aboard mate

[Dhuck]

Welcome to the forum mate

[Avo]

welcome,heaps of good advice and info as you already know.glad to have you join us.

[my third 256]

hi and welcome to the forum a great mob of people here and a lot of very usefull information
best wishes with your patrolling
stephen

[MEGOMONSTER]

Welcome mate, surely the best forum on the net. If you need it, you can get it, if you want to know it, just ask it.
If you want to find it, go to the search bar for a universe of information.
Enjoy the sights and sounds of the greatest show on earth.

[threedogs]

Hello Gary and welcome to the forum

[sooty_10]

Welcome Gary, it's sometimes a frustrating and painful (skinning knuckles) time working on your own truck, but at the end of the day so so satisfying. Always plenty of info and help available on the forum so jump in and enjoy.

[Patrol-Guy]

G'day Gary. Welcome to the forum. I've only been here a short time but am amazed at the amount of information at my fingertips. Pretty much any question you have has been asked, run a search on anything that comes to mind and there's sure to be a thread on it. Anyway have fun and if I can help, just ask.

Paul

[Gecko17]

Merry Christmas and welcome to the forum.


Sent from my iPad using Tapatalk HD

[Patrol-Guy]

Hi Gary, Merry Christmas and welcome to the forum.

[Drewboyaus]

G'day mate, welcome to the forum.

[trekster]

G'day and welcome to the best patrol forum around! Make sure to post up some pics of your beast in the members ride section ;)


Members Rides (http://www.nissanpatrol.com.au/forums/forumdisplay.php?43-Members-Rides)



This thread has alot of useful threads linked
(http://www.nissanpatrol.com.au/forums/showthread.php?16195-GC-Index-to-useful-threads)


Some mechanical threads that may be of interest:


Why Diesels Smoke (http://www.nissanpatrol.com.au/forums/showthread.php?12450-Why-Diesels-Smoke)

Checking and cleaning MAF sensors (http://www.nissanpatrol.com.au/forums/showthread.php?597-Checking-and-cleaning-MAF-sensors)

NADS discussion (http://www.nissanpatrol.com.au/forums/showthread.php?5526-Snicko-doing-the-NADS)


Recovery and safety!

Recovery Bible (http://www.nissanpatrol.com.au/forums/showthread.php?13556-Recovery-Bible)

Towballs are not recovery points (http://www.nissanpatrol.com.au/forums/showthread.php?5725-Tow-balls-are-not-to-be-used-as-recovery-points)

Recovery: The Fundamentals (http://www.nissanpatrol.com.au/forums/showthread.php?1984-Recovery-The-Fundamentals)



and lastly this should be read and passed on to anyone that is not aware of the fact

Deaths from towballs (http://www.nissanpatrol.com.au/forums/showthread.php?11239-Deaths-from-towballs)


Last but not least enjoy the forum and everything it has to offer, Don't be afraid to ask questions as we are all here to help each other out!


Cheers,
Eric.

[CmonSnipeMe]

G'Day and Welcome !

[Mcwm]

Hello and welcome fellow newbie