tb42 efi to td42 conversion

[we11fd]

Hey guys im in need of some help with my conversion, heres whats happening its abit of a bitsa but hopefully all comes together.
-Car was factory tb42e TI model
-Engine and complete wiring has been removed
-silvertop td42 with turboglide turbo setup sitting in its place, this motor was factory auto so no using that harness.
-The harness that has been installed was from a 1994 DX model.
-The cluster is from the same car as the engine.

My questions :)
1-Turbo timer- which wire on the steering column to i join to?
2-Jaycar speedo corrector which wire is the input to speedo in the cluster plugs
3-I have a resistor from the donor cars loom but no where to plug it in?

Im sure there will be more

Thanks in advance

[Woof]

Hey mate, head over to the Introduction section and post up an intro, usually get more assistance that way.............just the nice thing to do

[we11fd]

fair enough will do

[Yendor]

Hey guys im in need of some help with my conversion, heres whats happening its abit of a bitsa but hopefully all comes together.
-Car was factory tb42e TI model
-Engine and complete wiring has been removed
-silvertop td42 with turboglide turbo setup sitting in its place, this motor was factory auto so no using that harness.
-The harness that has been installed was from a 1994 DX model.
-The cluster is from the same car as the engine.

My questions :)
1-Turbo timer- which wire on the steering column to i join to?
2-Jaycar speedo corrector which wire is the input to speedo in the cluster plugs
3-I have a resistor from the donor cars loom but no where to plug it in?

Im sure there will be more

Thanks in advance

1. The large white wire with a black trace.

2. Grey wire (should be pin 24 at the instrument cluster).

3. Need a photo, but I guessing it was for the auto shift.

So what else lol

[we11fd]

Thankyou very much yendor I'll post a picture later