PDA

View Full Version : Performance Chips



dukesta83
18th November 2013, 06:04 PM
Hi guys
Am looking at getting a chip in my 2000 Patrol. Any opinions on Chip-It would be great. Looking at 3" system with the Dominator 3 chip.
I also heard a Dawes valve is a good idea. Waddya rekn?

mudski
19th November 2013, 01:23 PM
Hi guys
Am looking at getting a chip in my 2000 Patrol. Any opinions on Chip-It would be great. Looking at 3" system with the Dominator 3 chip.
I also heard a Dawes valve is a good idea. Waddya rekn?

You are better off installing the dawes, needle valve and then the egr block before you do anything. This will prolong your engine if the damage hasn't already been done... Also a catch can too. But you need a boost gauge installed first and preferably an egt gauge too.
Then worry about the chip and exhaust. As for the chip, I can't comment on rhe said chip. I have a Dp chip and a 3inch Redback system with no muffler. Only a hi flow cat. Runs good now. Just waiting on funds so I can get a larger intercooler and then start the air intake mods.