PDA

View Full Version : Grease Nipples



angelo_f
8th November 2013, 04:47 PM
Greetings

I have a GQ SWB 88 Patrol. I have been reading through manual on lubrication and it says to install grease nipples to grease steering linkages. Are there different size grease nipples. Supercheap have a few there

http://www.supercheapauto.com.au/search-results.aspx?keywords=nipples&look.x=0&look.y=0

Which ones should I get.

Also, I was going to use this grease (I have an old 400g gun)
http://australia.rs-online.com/web/p/greases/0692671/

Is that OK?

Thanks

kevin07
8th November 2013, 05:18 PM
yes definitely have different sizes also if you have to install them yourself you will probably need to knock them in no thread on the nipples

threedogs
8th November 2013, 05:30 PM
Heaps of different sizes, take a sample to a bearing place ,they should sell them
or buy a grab kit off Ebay

angelo_f
9th November 2013, 11:37 AM
yes definitely
Is that yes to that grease?

threedogs
9th November 2013, 01:43 PM
I tend to use LMM graphite ultra high temp,
My manual say any GP grease is good, so yes to your choice