Ajwood
23rd September 2013, 06:16 PM
Hi Guys,
Please recommend a supplier for a radiator to fit a GQ 96 Diesel.
Thanks
AJ
Gq jack
29th September 2013, 04:15 PM
Hey mate,
I just drove from Sydney to taree to get a new alloy radiator.
Had an adrad copper brass and now have a FENIX high performance radiator in.
Difference in comparison is highly noticeable. Was a 26mm core, now sporting a 52mm core which also includes (on both sides) a heat exchanger on both end tanks.
Paid $1199 which was the total cost for new radiator, new aircon condenser, reciever dryer, re gassing and installation.
I also changer the thermostat to an early opening @ 68 degrees.
Under full load on the freeway I am not able to go over 90 degrees and consistently sits between 75-90 degrees. This taken from an sutton gauge with an inline temp sensor on the hot side of the cooling system.
TD42 GQ patrol.
Gq jack
29th September 2013, 04:16 PM
Autron gauge
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.