TD42Ti exchange Injectors

[Rip'n'Shred]

I'm looking at getting a set of exchange injectors for my TD42Ti 2006 Patrol. Can anyone recommend someone in the Hunter Valley area or someone who does mail order injectors.

Also I keep hearing conflicting stories of whether to get increased crack pressures or factory settings. Any advice?

I've got a 3" exhaust, boost and pump wound up, an electric lift pump to go on and looking for a dyno tune too if anyone can recommend someone in the Hunter Valley area?

[Pezzer]

Checkout this link from Parksy. http://www.fuelinjector.citymaker.com/catalog/item/5426601/5376382.htm

[BigRAWesty]

Get factory. Buy increasing crack pressure it effectively changes the "timing" of the injection.
If you fiddle with one you have to fiddle with the rest..
I think

[nissannewby]

I don't know of anyone in your area but most highly regarded injector shops will post. As for your model 2 through 5 can just be swapped out however you will need to buy a whole new injector for number one as they can not be rebuilt due to the sensor.

[BauerPower]

I don't know of anyone in your area but most highly regarded injector shops will post. As for your model 2 through 5 can just be swapped out however you will need to buy a whole new injector for number one as they can not be rebuilt due to the sensor.

The number 1 injector can be rebuilt. I do an exchange set for $60 each. The one with the sensor new and genuine I sell for $160 and $90ea for the others.

I have not had any problems rebuilding them. Most people shy away from rebuilding them because they don't have the proper test gear to test the sensor.

Im north of Brissy and will post.

[First Patrol]

Where abouts north of brisbane mate? I'm in Gladstone

[BauerPower]

Near North Lakes. About 20mins north of brissy. I can get stuff to Monto nearly once a week. Which is a bit closer to Gladstone then where I am. My brother lives there and comes down on weekends.