the ferret
8th January 2011, 01:51 PM
This is something I knocked up some time ago for my GQ,
I found that when lifting a 35 back onto the rack it was very heavy and hard to line up the studs.
This little bracket is simple, bolts on and allows me to rest the wheel and then turn it to line up with the studs and just push the wheel on and fit the nuts. I dunno why Mr Nissan didn't do this on the GQ?, to save money I spose:furious:
http://i608.photobucket.com/albums/tt164/ferret/P1010354.jpg
Simple to make if you're handy with a welder, a short bit of 3'' pipe and a bit of flat plate, a drill and a couple of small bolts.
I found that when lifting a 35 back onto the rack it was very heavy and hard to line up the studs.
This little bracket is simple, bolts on and allows me to rest the wheel and then turn it to line up with the studs and just push the wheel on and fit the nuts. I dunno why Mr Nissan didn't do this on the GQ?, to save money I spose:furious:
http://i608.photobucket.com/albums/tt164/ferret/P1010354.jpg
Simple to make if you're handy with a welder, a short bit of 3'' pipe and a bit of flat plate, a drill and a couple of small bolts.