rock slider

[Maxgq]

Im going to make rock sliders soon and need tips and designs, anyone have some pics?

Thanks, Max

[89gqpatrol4x4]

Hey mate, there are a few threads on here about this with plenty of pics aswell. I made mine from medium wall (3mm) 50 mm internal diameter steel. Bolts to the chassis in three places and extend slightly so can be used as a step aswell.

[threedogs]

I welded 12mm square plates to chassis 3 each side with 1/2" thread in each corner. hindsight, 4 would be better
That way a matching plate can bolt to that and the slider welded to that, via support arms.

[menace 2]

I welded 12mm square plates to chassis 3 each side with 1/2" thread in each corner. hindsight, 4 would be better
That way a matching plate can bolt to that and the slider welded to that, via support arms.

did you hang the plates below the bottom of the chassis TD ?