View Full Version : airbox
Ben-e-boy
27th July 2013, 10:18 PM
Gday
Does anyone know of someone who builds custom high flow air boxes using panel or barrel type filters.
Cheers
Benny
MudRunnerTD
27th July 2013, 10:21 PM
http://www.patroldocta.com.au/custom_engineering.html
ozzyboy
27th July 2013, 10:24 PM
http://fatzfab.cqoz.com/index.html
Ben-e-boy
27th July 2013, 10:41 PM
Cheers guys I will llook into them
MudRunnerTD
27th July 2013, 10:59 PM
Allot of the comp guys are running the Patroldoctor box with the snorkel through the bonnet. Looks wicked.
On my list of mods for sure!
nissannewby
28th July 2013, 09:14 PM
Allot of the comp guys are running the Patroldoctor box with the snorkel through the bonnet. Looks wicked.
On my list of mods for sure!
The larger unit they offer or the zd copy?
MudRunnerTD
28th July 2013, 09:16 PM
The larger unit they offer or the zd copy?
Yeah the big barrel box and through the bonnet snorkel. Top notch mate
Winnie
28th July 2013, 09:18 PM
Millweld do a panel style one
Sent from my iPad using Motorculture mobile app
nissannewby
28th July 2013, 09:19 PM
Yeah the big barrel box and through the bonnet snorkel. Top notch mate
Yeah the zd copy one doesn't actually flow any better than the Nissan item.
PMC
28th July 2013, 10:13 PM
Yeah the zd copy one doesn't actually flow any better than the Nissan item.
G'day mate,
Which one would you go with?
Regards,
Paul
nissannewby
28th July 2013, 10:19 PM
The fatz fabrication item is pretty good
happygu
28th July 2013, 10:21 PM
There is a few on EBay that I was looking at for a mate
http://www.ebay.com.au/itm/NISSAN-PATROL-HI-FLOW-ZD30-AIRBOX-SUIT-TURBO-V8-GQ-GU-/190872505901?pt=AU_Car_Parts_Accessories&hash=item2c70e34e2d
or
http://www.ebay.com.au/itm/GQ-Nissan-Patrol-EFI-Airbox-TB42E-Australian-Made-LPG-gas-Alloy-intake-Aluminum-/280934809612?pt=AU_Car_Parts_Accessories&hash=item416905000c
Mic
MudRunnerTD
29th July 2013, 10:16 AM
Here is a link to some better under bonnet pics of the Patrol Doctor box and snorkel. rrp$750
Patrol Doctor Air box on MudRhino (http://forum.mudrhino.com.au/viewtopic.php?t=29407)
MC97GQ
29th July 2013, 02:15 PM
Hey Ben,
I have the PatrolDocta ZD type airbox on my GQ and I am really happy with it.
It has 4" inlet and 4" outlet to the turbo, seems to breath really well, I also run a K&N filter in it. And have a ryco paper type for when the K&N needs a clean and dry.
It's made from all stainless and sits nicely under the bonnet.
32310
Mark
Winnie
29th July 2013, 02:32 PM
I have the same box and mine is 3.5" in and out?
Trying to use Motorculture
MC97GQ
29th July 2013, 02:58 PM
I have the same box and mine is 3.5" in and out?
Trying to use Motorculture
Winnie,
I don't know if they changed the size of the inlets and outlets but I know mine are 4"/100mm because of the silicon fittings I had to chase up for it.
Mark
Ben-e-boy
29th July 2013, 04:22 PM
Thanks for your input everyone
Well I rang fatz fab today, they are going to send me some pictures or one in a gq
Ill ring millweld and try to get some flow figures and see if it will suit.
Mark, I would go for the one you have for fitment etc, but it dosnt actually flow enough to suit my application, I need something much bigger
Cheers
Ben
AB
29th July 2013, 07:18 PM
Hey Ben,
I have the PatrolDocta ZD type airbox on my GQ and I am really happy with it.
It has 4" inlet and 4" outlet to the turbo, seems to breath really well, I also run a K&N filter in it. And have a ryco paper type for when the K&N needs a clean and dry.
It's made from all stainless and sits nicely under the bonnet.
32310
Mark
That's what I got too. My old Zd30 box was leaking and just got one of these due to the snorkel position and limited room under ze hood.
Look forward to seeing your beast when It's all done though Benny!!!
chicken1
31st July 2013, 05:16 PM
Millweld do a stainless ones, or 4by fabrications do a alloy billet one.
PMC
13th August 2013, 09:33 PM
G'day Trendsetters,
After fitting the new 18G billet wheel Kinugawa turbo set-up.I am now back to square one regarding air in take issues.
The new set-up is collapsing the intake hoses again. The current set-up worked fine with the UFI TDO5 16G turbo set-up, however, the more powerful Kinugawa turbo set-up requires more air-flow.
PS, i will keep you all informed of my research.
Regards,
RLI
MEGOMONSTER
14th August 2013, 04:44 PM
G'day Trendsetters,
After fitting the new 18G billet wheel Kinugawa turbo set-up.I am now back to square one regarding air in take issues.
The new set-up is collapsing the intake hoses again. The current set-up worked fine with the UFI TDO5 16G turbo set-up, however, the more powerful Kinugawa turbo set-up requires more air-flow.
PS, i will keep you all informed of my research.
Regards,
RLI
And you say money is tight. I can now see why. Lol
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.