Neesmo31
4th January 2011, 02:10 PM
Hey all been talking to a lad on another forum who may be helping me through an all motor build on my TB42.
If anyone has done this before or can help me out with any niggling issues that I may come across when doing such a thing your help would be much appreciated.
Will basically be doing the following:
TB42 bathed cleaned and checked
Head bathed cleaned and checked
New bearings/seals/gaskets throughout
Shaved block/head compression ratio of around 10:1
Shot peened rods
Upgraded cam/springs/rets
XF throttle body
Port matched to inlet/exhaust
headers and full exhaust, hi flo cat and mufflers
Large injectors/pump (already in car)
Haltech E6K tuned
Hoping for around 150-160rwhp
Thanks.
If anyone has done this before or can help me out with any niggling issues that I may come across when doing such a thing your help would be much appreciated.
Will basically be doing the following:
TB42 bathed cleaned and checked
Head bathed cleaned and checked
New bearings/seals/gaskets throughout
Shaved block/head compression ratio of around 10:1
Shot peened rods
Upgraded cam/springs/rets
XF throttle body
Port matched to inlet/exhaust
headers and full exhaust, hi flo cat and mufflers
Large injectors/pump (already in car)
Haltech E6K tuned
Hoping for around 150-160rwhp
Thanks.