4 Inch stainless snorkle onto a 2.8?

[patrol2.8]

Just finishing helping jnr fit a 4 inch stainless snorkle to his gu now he wants to fit one to the 2.8 im thinking the ole 2.8 would have a seizure taking in that much air what do you guys reckon

[MudRunnerTD]

Nah all good mate, it will only take what it wants and needs. there will be no down side to that.

[nissannewby]

Bigger is better for a turbo diesel like the 2.8. Hell if it would fit I would have a 5" on my 4.2 for performance reasons.

[rkinsey]

Would be like hanging a chimney on the side of the patrol.

Mate, if you have got pics of the upgrade that would be a great help.

[patrol2.8]

Will post pics once finished

Sent from my LG-P500 using Motorculture mobile app

[kabar]

Do it. The way I see it is, even though it would not utilize the air now, but if there is ever a bigger engine put in you already have the snorkel for it. You can always restrict the air if too much, but you can't add more air if already restricted (without redoing). Less hassles to get what does the job now and the future. Pretty much same cost and labour regardless of size.

[threedogs]

If your trying to get more air in might want to think about exhaust and getting more air out.
As most motors from any factory are choking, helping them breathe has to be a good thing

[trekster]

If this is going on a GU 2.8 would love to see pictures when completed, Currently contemplating doing similiar myself!


Cheers,
Eric.

[patrol2.8]

Trekster
I have the standard snorkel fitted if I was to convert to 4 inch would just go through the same hole after enlarging it and then reduce it down to a 3 -21/2 inch and run it exactly along the same route as the standard keeping all the original fittings under the guard to the air box so effectively would just really be a bling thing other thing to consider is putting a cover over the top as dimwits tend to drop beer cans down them

[trekster]

Just wanted to see what it would look like on the car hey, whether I want to go that route or a plastic one.


Cheers,
Eric.

[patrol2.8]

Just wanted to see what it would look like on the car hey, whether I want to go that route or a plastic one.


Cheers,
Eric.
No worries I can throw up some pics of the young blokes gu with a snorkel his runs the full length of the guard looks nice

[trekster]

No worries I can throw up some pics of the young blokes gu with a snorkel his runs the full length of the guard looks nice

Yeah mate if you can would be great cheers.

[patrol2.8]

will post over the weekend

[patrol2.8]

Sorry trekkster got a bit tied up with things and the pics slipped my mind

[rkinsey]

That is one slick piece of snorkel. Is it one piece or is it three separate bits?

[patrol2.8]

Thanks snorkle is all one piece was a pain in the butt to fit but the end result was worth it

That is one slick piece of snorkel. Is it one piece or is it three separate bits?

[trekster]

Holy shite that looks mint..... Did you just buy a piece of pipe and get someone to mandrel bend it up?


Cheers,
Eric.

[BigRAWesty]

Holy shite that looks mint..... Did you just buy a piece of pipe and get someone to mandrel bend it up?


Cheers,
Eric.

Looks like pre bent sections welded in. Very nice though. How I'll be doing mine I think..

[Alitis007]

Sorry trekkster got a bit tied up with things and the pics slipped my mind

Nice! I just made my own last weekend, went to the rear of the guard to make it look a bit sleeker but gave myself a bigger head ache lol

Heres a couple of pics 33568
33569

[BigRAWesty]

Nice! I just made my own last weekend, went to the rear of the guard to make it look a bit sleeker but gave myself a bigger head ache lol

Heres a couple of pics 33568
33569

Did you go straight threw? Or down the 1/4 to the front box?

[Alitis007]

Did you go straight threw? Or down the 1/4 to the front box?

I went to the front where the original is, i had to open up the hole by 10mm and made a plate and tight radius bend to go between the guard and inner guard33570335713357233573

[BigRAWesty]

Geeze that's tight.. But looks good.. I'm looking at going straight threw.. Bypassing my front air box and just going to the top.. It's on the to'do list.. Lol

[patrol2.8]

Sorry guys it is made from peices pre bent and welded up he didnt make it himself though he bought this one from someone thats why it was such a pain to fit westy i like the way yours is done i think they look better entering the rear of the guard

[Alitis007]

Geeze that's tight.. But looks good.. I'm looking at going straight threw.. Bypassing my front air box and just going to the top.. It's on the to'do list.. Lol

I couldn't go thru the inner guard coz there is a reinforced strip that i didn't want to cut and my abs unit is there aswell.

[patrol2.8]

Been awhile but finally got around to fitting that 4 inch snorkle