Reversing globes -

[Maxgq]

What are some good reverse globes? i bought some from ebay thinking they would be good and they were worse than the originals, whats your opinion

[mick.]

What type of bulb does yours take?

Cheers Mick

[Clunk]

T15s in a GQ...... I just got 120 smd jobbies from eBay for mine. Better that what the originals were.

MC app sucks big hairy ones!!!!!!!! Having to delete and reinstall everyday........



edit: Im terribly sorry, theyre BA15s and NOT T15s................ got mine from here http://www.ebay.com.au/itm/2x-1156-BA15S-120SMD-LED-Car-Xenon-Back-up-Reverse-Brake-Light-Bulbs-White-AU-/151045254152?pt=AU_Car_Parts_Accessories&hash=item232affac08&_uhb=1

[Winnie]

I've got 7W LEDs in mine but not bright enough, I've got dark windows which are hard to see out of at night.


Sent from my iPad using Motorculture mobile app

[Clunk]

see correction in my previous post

results here http://www.nissanpatrol.com.au/forums/showthread.php?2167-Clunk-s-Fatboy/page17

[threedogs]

try these cant find pic but single lead bayonet style on the base and 120 smd led.
brake lights have twin lead on base and indicators are same as reverse, very very bright.
Will put up a pic later, getting snorkel fitted this morning,
Top light is square 35 watt led job, side reverse lights total of 480 smd led,240 a side

[mick.]

I can get them in 50 watt. The only thing is it would have to be a group buy as I'm not going to order 100 bulbs to sell 2 pairs.

The group buy could be for pretty much any bulbs in 50 watt and some even 80 watt and I can get them in white orange and red.

Cheers Mick

[Winnie]

What are the highest output that you actually have at the moment Mick?

Trying to use Motorculture

[mick.]

I have 30 watt T20s only. I plan on getting others when my website is up and running and the projector side is 100% sorted. Then I'll get into led bulbs and spotlight HID kits.

Cheers Mick

[Winnie]

What is the highest you'd recommend running with all standard wiring? So just swapping bulbs only.

Trying to use Motorculture

[mick.]

I personally think 30 watts would be about it as I'd be a little worried about running 50 watts let alone 80 watts in a factory housing let alone the wiring handling it. If you had your hazards on for a while or brakes on for a while it might melt something. You may find that the 80 watt bulbs would be restricted to 30 watts though the small wiring too.

If I could find out what bulbs fit the fog lights on patrols then I'd look into the 80 watt LEDs for them but for indicators, brakes and parkers I'd be more inclined to stick to 30 watts max.

Cheers Mick