GU scoop mesh

[threedogs]

Hi someone was after something to stop their IC getting wrecked from rocks etc.
This is what I used bare in mind I have large scoop fitted, Couldn't pick any difference with it installed or not. I've only just fitted new tigged IC so I'll be putting it back on.

[BigRAWesty]

How do you hold it in place 3D?

I have a small sheet of this so if anyone wants some I can cut a square and send it off. You just need a good set of tin snips or grinder to shape. It is quite expensive but is 316 stainless..

Kallen Westbrook
Owner of
Westy's Accessories (http://www.nissanpatrol.com.au/forums/showthread.php?15134-Westy-s-Accessories.-A-small-back-yard-builder.)

[threedogs]

Hi Kallen I picked it up as an off cut, yes its S/S and having the bigger scoop
I just fit it in by lifting centre of scoop up, spring loaded, so to speak, Not to Flash
ATM but I'll get a pic in Sitcu soon

[threedogs]

Here's a pic in sitcu for anyone interested, just need to cut and shape with a grinder.
Cut and shape a piece of cardboard if it makes it easier