View Full Version : Clutch problems
luke28
5th June 2013, 11:03 PM
Need help my patrol is stuck in deer park I was at the lights and put it in neutral when I went to put it in first it wouldn't go I finally got it in now I've got nothing theres no pressure on the pedal at all I had a look and noticed a leak from one of the bolts on the clutch master where it bolts on the firewall and the clutch fluid is still full? ????
Sent from my IQ255 using Motorculture mobile app
Woof
6th June 2013, 01:48 AM
I have got no idea mate but hopefully someone will be able to help for you soon
krbrooking
6th June 2013, 03:14 AM
At the start of the post I would have said your synchro had gone but if you have no clutch pressure, that normally points to to a leak/air in the system or your plate could be naked or your thrust bearing could be. Other than that don't know off the top of my head.
Sent from my iPhone using Motorculture mobile app
GQ TANK
6th June 2013, 12:19 PM
No Pressue and leak - sounds like the master -cyc has died
luke28
6th June 2013, 09:57 PM
Cheers people yeah it was the clutch master cylinder bloody 10 minute job left me on the side of the road 150km from home
Sent from my IQ255 using Motorculture mobile app
Bloodyaussie
6th June 2013, 10:46 PM
Glad it is sorted mate... nothing like being stranded hey!!
GQ TANK
9th June 2013, 06:10 PM
Get your self a slave cylinder as often the slave die after the master is replaced.
luke28
12th June 2013, 12:06 PM
Cheers I will hope that doesn't take long to do haven't done it before
Sent from my IQ255 using Motorculture mobile app
happygu
12th June 2013, 04:11 PM
Get your self a slave cylinder as often the slave die after the master is replaced.
I would follow this advice, because it happened to me - master the first time, then a month later slave - both times in Wonnangatta....
Mic
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.